Why wont the screws on my toilet seat tighten?
If the bolts spin and don’t tighten, you’ll need to use pliers to grip the nut on the underside of the toilet while turning the top of the bolt with a screwdriver. Tighten until the seat stops wiggling. Simply buy one of the seat tightening kits that are available at hardware or home improvement stores.
How do you get a rusted screw out of a toilet base?
The first step to remove your toilet tank bolts, rusted or not, is to take a flat head screwdriver and a wrench. Use the screwdriver to hold the bolt in place. Then take the wrench over the nut under the tank, and turn it counterclockwise. This will loosen it.
How to troubleshoot a Kohler toilet water supply?
1 Fully open the water supply shut-off valve. 2 Verify that the flapper or canister are properly seating after the flush. A loose chain or other object may be interfering with the refill. 3 Clean the fill valve inlet or the fill valve seat/seat washer. 4 Verify that the water supply is free of debris.
What kind of float system does Kohler toilet use?
Kohler toilets use two types of float systems to regulate the water in your toilet tank. One is the standard plastic ball on a long copper arm, the other is an all-in-one design called a Fluidmaster that incorporates both the toilet float and the fill valve in one unit.
Are there holes in Kohler toilet seat anchors?
Making two holes into the toilet to anchor the seat and NOT PROVIDING ANY ACCESS UNDERNEATH OR ANY WAY FOR THE HOLE TO DRAIN WHATEVER FLUID GETS INTO IT IT’S NOT A GOOD DESIGN KOHLER!
How to fix slack in Kohler dual flushing toilet?
The troubleshooting problems in this help topic include: If you are unable to correct the problem, contact KOHLER Customer Care Center: Check the trip lever chain for excessive slack. Remove one or two chain links to remove slack, if needed. For dual flushing toilets, verify that the rod length is correct.
When do you need to replace a Kohler toilet seat?
Some Kohler toilets use an attachment system for their seats called anchors. Normally these anchors do not need to be replaced when changing your toilet seat unless they have broken and the seat cannot be removed. The seat anchor kit (part number 84999) is for the removal of broken anchors and the installation of new ones.
How to fix a Kohler toilet overflow valve?
Corrective Actions: 1 Partially close the water supply shut-off valve. 2 Check the fill valve for debris, and clean as needed. 3 Make sure the rim feed hose (if equipped) is connected to the overflow and fill valve. 4 Replace the fill valve with a genuine KOHLER fill valve for optimal performance.
What do you call a standard Kohler toilet tank?
Use only KOHLER Genuine Parts to avoid property damage and achieve optimal performance. The phrase “Standard Toilets” applies to floor-mounted toilets with standard flush and fill valves and dual flush models. Refer to In-Wall Toilet Tank Troubleshooting if you have an in-wall toilet tank.
How to troubleshoot a Kohler dual flushing toilet?
Corrective Actions: 1 Check the trip lever chain for excessive slack. 2 For dual flushing toilets, verify that the rod length is correct. 3 Verify that the hose is properly connected to the top of the canister. 4 Verify that the water level meets the marked waterline. 5 Clean the rim holes under the bowl rim.
