Why is there no water coming out of my triton shower?

Why is there no water coming out of my triton shower?

Number 1: There is no water coming from the shower at all, or it stops and starts. This is it, the most common fault with electric showers – the solenoid valve. If you find the shower stops working completely, or indeed cuts off (very often when you have soap in your hair) this is the culprit.

Can a power shower be connected to mains water?

Electric showers only need a cold water feed to work. Unlike mixer showers, which take a hot water feed straight from your boiler, an electric shower can be connected straight into your mains water supply. This makes them incredibly versatile when it comes to installation.

How do you clear an airlock in an electric shower?

Air locked shower

1. Remove the shower head, it screws off.
2. Let the shower hose hang straight down in the bath or shower.
3. Turn the flow dial all the way anti clockwise. (
4. Turn the power selector to blue (usually the top dial)
5. Turn on the shower.

Why is there only cold water coming out of my electric shower?

When electric showers run cold, one of three things is usually to blame. These include reduced water pressure, a limescale problem, and problems with the inlet gauze filter. There is no need to hit that shower head with a hammer.

Why is my shower pump not working?

– Check that the power supplying the pump has not tripped out (this may be due to the pump running dry). – Check that none of the inlet or outlet pipes are kinked or blocked. This could stop water from getting through to the pump. – Try resetting the pump by switching off the power for a few seconds.

Why does my Triton shower have no hot water?

Continuity on the tco probe on eachside of the tco open circuit it’s knackered. Thats with mains power isolated. Or you can check with mains power on and you should get 230v on bothsides. Above the stabiliser valve is a plastic pin when the shower is turned on the plastic pin rises and touches a micro switch in the switch assembly above.

Can you get a new solenoid valve for a Triton shower?

I looked on shower spares sites for a new solenoid valve for my Triton AS2000XT shower and was fairly settled on buying a new shower as the valves were near £120. I thought I’d have a quick check on eBay to see if I could get a new shower or a solenoid valve on the cheap.

Why is my Triton Rapide R3 shower not running?

Triton Rapide R3 doesnt power on. The light on the box to the cord switch is on however no power lights to the shower unit itself. No water flow, nothing. All apparent fuses on main switch board are on, can’t find a separate one or any other for the shower.

Where is the pressure switch on a Triton shower?

Above the stabiliser valve is a plastic pin when the shower is turned on the plastic pin rises and touches a micro switch in the switch assembly above. You can see the pressure switch just above the triton sticker to the left. Thanks very much mate i carefully tested between the contacts with the power on and there was no voltage between them.

Continuity on the tco probe on eachside of the tco open circuit it’s knackered. Thats with mains power isolated. Or you can check with mains power on and you should get 230v on bothsides. Above the stabiliser valve is a plastic pin when the shower is turned on the plastic pin rises and touches a micro switch in the switch assembly above.

Above the stabiliser valve is a plastic pin when the shower is turned on the plastic pin rises and touches a micro switch in the switch assembly above. You can see the pressure switch just above the triton sticker to the left. Thanks very much mate i carefully tested between the contacts with the power on and there was no voltage between them.

Triton Rapide R3 doesnt power on. The light on the box to the cord switch is on however no power lights to the shower unit itself. No water flow, nothing. All apparent fuses on main switch board are on, can’t find a separate one or any other for the shower.

Why do I have no water coming through my shower head?

If there is little hot water coming through the shower, but the cold water pressure is fine, the problem will be related to the hot water unit. Again, check out the hot water taps in the house and if the hot water pressure is fine to those taps, it will the washers in the hot tap of the shower that will need to be replaced.