Why is the Bosch Water Wizard 10p cannot turn back on?

I have a Bosch Water Wizard 10P hot water system and due to strong winds the pilot light went out (again….sigh….). But while trying to turn it back on I accidentally pressed the off button and now i cannot turn it back on. I have tried turning it on as per the instructions but the off button wont change and the on button wont budge.

How to contact Bosch hot water ignition 10p?

Any ongoing issues you have had with the product in which you would like to be resolved, we would encourage you to contact our Customer Contact Centre by phone on 1300 30 70 37 (Mon-Fri 8am-6pm (AEST)) or email us at [email protected] Bosch Pilot Ignition 10P hot water units come with a 2 year warranty from the date of installation.

How to operate the Bosch Water Wizard 600?

Operating instructions Open all hot water taps to expel any air prior to lighting Remove front cover by loosening the two screws at the lower rear corners of the cabinet. Check that gas and water valves are open, operate as indicated in Fig. 3 Refit front cover and tighten screws Fig.

Is the Bosch hot water on demand a good idea?

The idea of hot water on demand is a good one, if that is what you get. You’re not going to get a great flow from this product but it is adequate when it works. The main issue with the Bosch 10p is the pilot light keeps going out and won’t stay lit.

Why does my Bosch hot water system need to be replaced?

If you do get water into the gas chamber, you will be up for a new hot water system. That’s why this is important to keep checking your Bosch hot water system. Sometimes it may not have entered the gas chamber yet, but when there’s water dripping onto the gland sleeve, over time it will stuff it up and it will need replacement.

What does the water section look like on a Bosch hot water?

What the water section looks like on a Bosch Hot Water Service Adelaide & Adelaide Hills of SA – YouTube so you own an older model #Bosch #hotwater service!

Can a Bosch 10p be connected to natural gas?

The water wizard range of hot water heaters is still in manufactured for the 10P and 16P units. The 10P unit delivers up to 10 litres a minute while the 16P delivers up to 16 litres a minute. Both 10P and 16P units can be connected to either natural gas or LGP and must be installed on the outside of the home.

How can I adjust the temperature of my Bosch hot water system?

Go inside your house and fully turn on a hot tap in the laundry or bath. The water flow adjustment is this white tap at the front of the unit. Turn it anti-clockwise. This will allow the water to flow through the unit as fast as possible. It’s great in the summer time as the water is slightly warmer flowing into the unit.

How can I troubleshoot my Bosch tankless water heater?

If the tankless water heater develops a problem, troubleshoot it before calling for service. Disconnect the power supply to the water heater before removing the cover. Inspect the water supply. Connect the supply line to the blue inlet on the water heater.

Do you need power point for Bosch hot water range?

Available as an External installation, the Bosch Pilot range provides constant hot water at the turn of a tap, without the need for a power point. Only heating water when required, the range is extremely economical to run.

Are there any water wizard hot water heaters left?

The water wizard range of hot water heaters is still in manufactured for the 10P and 16P units. The 10P unit delivers up to 10 litres a minute while the 16P delivers up to 16 litres a minute.

What to do if your water heater pilot light is not working?

Check around the gas heater and lines before igniting the pilot. If you smell gas or suspect a leak, turn off the supply and call the utility company or a professional repair person for help. Turn the temperature knob on the outside of the unit to the lowest setting. Use a flashlight to see the small parts and lettering on the water heater.

Can a Bosch hot water heater light pilot?

Listing monitored by Bosch Hot Water & Heating representatives. Just moved few days ago cannot get ‘stop’ button to come out to normal position. Did the WD40 silicone trick as shown on YouTube. So cannot light pilot at all! Cold showers. 4 buttons, lets just call them left to right 1 2 3 4.

What to do if your hot water heater pilot light goes out?

Replacing the thermocouple usually does the trick. If your hot water heater suddenly stops working, chances are a bad thermocouple has shut off the gas to the pilot light. Replacement is an easy DIY repair. No hot water? If you have a natural or propane gas water heater, chances are the pilot has gone out.

Why does my water pilot keep going out?

Therefore, a dirty thermocouple might be the reason why your water pilot keeps going out. A layer of dirt and grime can hinder the electric current from reaching the thermocouple. As a result, the gas supply will be cut off and the pilot light will go out.

What should I do if I hear water running through my Bosch pilot?

If this is the case and you can hear water running through the unit with no hot tap open, we recommend that you shut off the water isolation valve to the unit and phone a plumber. We can assist you with getting in touch with an approved service technician at 1300 30 70 37 on a weekday any time between 7:30AM to 6:00PM (AEST).