Why is my Kohler bathtub faucet leaking?
Temporary leak: Dirt or debris has collected in the aerator, the screen located at the end of the spout. This drip lasts for a minute or two after the faucet is turned off. Continuous leak: The valve/cartridge under the handle that controls the flow of water has worn out.
What to do if your Kohler shower valve is leaking?
Kohler shower valves occasionally require service. The first step in correcting a dripping or leaking valve is to identify the valve installed in your home. Assistance identifying the valve can be found in the “Identify a Single Control Bath/Shower Valve” article.
What are the different types of Kohler shower valves?
Rite-Temp® pressure-balancing valve body and cartridge kit with service Rite-Temp® HiFlow Rite-Temp® 3/4″ pressure-balancing single-handle with Rite-Temp® 1/2″ pressure-balancing valve with push-button diverter and s… Forté® Rite-Temp® bath and shower trim with slip-fit spout and 1.75 gpm …
What causes shower rise valve to back up and leak?
If the valve is connected to a handshower or other device with restricted flow, the water will back up and leak out of the showerhead. This is called shower rise. The K-305 valve was discontinued June 2010 and replaced by the K-11748 valve. Excessive inlet pressure can also contribute to a leak or drip issue.
How big of pipe do you need for Kohler rite temp valve?
Kohler Rite-Temp valves require 1/2″ copper pipe to connect the valve and the tub spout. If PEX is installed, a delayed flow of water may occur. The PEX will expand (thermal expansion) causing a slight delay in the flow of water getting to the tub spout or showerhead.
What should I do if my Kohler tub faucet is leaking?
This fix stops the leak immediately and does not require a plumber. Turn off the water to the bathtub by shutting the water valves behind the shower or tub wall. There is usually an access panel in the wall. Remove the cover on the handle of the faucet that is leaking by prying it off with a small knife.
Where is the valve on a Kohler bathroom faucet?
The valve/cartridge is located under the handle. Continuous leak when faucet is on or off: The issues should be resolved by replacing the valve/cartridge. The part number of the replacement valves will vary depending on the faucet model number. Identify your faucet model number.
Kohler Rite-Temp valves require 1/2″ copper pipe to connect the valve and the tub spout. If PEX is installed, a delayed flow of water may occur. The PEX will expand (thermal expansion) causing a slight delay in the flow of water getting to the tub spout or showerhead.
How does a Kohler shower control valve work?
The brass, round, splined stem rotates clockwise to turn on. Push or push/pull diverter diverts water from the bottom port outlet to the top port outlet. Note: The K-305 Rite-Temp Diverter Valve features a smooth diverter stem. The K-11748 features a threaded diverter stem. Reference the photo below for more detail.
