Why is my flame more orange than blue?

The flames from a natural gas stove can tip you off to a possible hazard. If you see orange flames instead of blue flames, the burners may need cleaning or adjusting. The orange color alerts you to your gas stove’s improper combustion, which may emit unsafe levels of carbon monoxide gas.

What color should flame be on water heater?

The correct flame color should be a light blue with the minimum of yellow tips. Incorrect flame color is yellow or sharp blue orange. If you see the burner flame color is yellow and lazy do the following: Provide sufficient fresh air to the water heater, especially if the unit is installed in the confined area.

Why is my cooker flame orange?

If your gas hob flame is burning orange, then your worktop needs attention immediately. An orange or yellow flame means that it’s releasing carbon monoxide as it burns which isn’t what you want at all. A healthy flame will just be blue. It can be temporary and caused by particles in the air.

What does it mean when your water heater is burning orange?

Filter by: The flame of any natural-gas appliance should be blue in color (with maybe a little yellow at the very tip of the flame). The orange flame of your water heater indicates that the gas is not combusting efficiently, and it’s a sure sign that your heater needs adjustment or repair.

What does a blue flame on a water heater mean?

Blue flame means that everything is OK and the air/gas mixture is in the correct ratio. Yellow flame occurs when there is not enough air coming to the flame. Orange or red flame happens when dust and other debris burn together with the gas.

What should I look for in my water heater flame?

The main indicators of the proper gas combustion are the stable blue flame or blue flame with the yellow inner cones (see the picture). Proper operation requires sufficient air supply and ventilation, and the venting and exhaust system must not be blocked or have any obstructions.

Why is my water heater burning more soot than normal?

This is also a safety concern because it usually means more soot (and possibly carbon monoxide) than normal is being produced by the burner each time it is used. First, check if your burner is getting enough ventilation to facilitate proper combustion of the gas.

What to do if your propane burner flame turns orange?

Have the LP company put some methanol in the tank that will usually take care of it. The end of all this orange does not cause an unsafe condition that would be if the flame was yellow. Usually the orange will go away after a short time. > The end of all this orange does not cause an unsafe condition that would be if the flame was yellow.