Why does my Kenmore water softener float too high?
The water softener float valve is set too high If your water softener is full of water, another potential solution is to change the Kenmore water softener float setting. The water softener float valve controls the water levels in the brine tank.
Can a water softener cause water in the Salt Tank?
This may be the main cause of your water softener problems and water in the salt tank. You can have it repaired if the issue is a non-essential component like an o-ring You will, however, need a water softener brine tank replacement if it’s a more serious problem. Contact a specialist to make sure before taking action. 2.
What happens when water softener is set too high?
The water softener float valve controls the water levels in the brine tank. If it is set too high, excess water may build up, and your unit may not be able to release all the water after each discharge cycle.
Can you repair a Kenmore water softener at WaterSmart?
Trust WaterSmart with your Kenmore water softener repair. We have been in operation for 25 years and have have extensive knowledge in everything from Kenmore water softener installation to Kenmore water softener repair and replacement.
Why is my Kenmore water softener getting salty?
Another reason why you may be getting salty water is that your float levels may be too high. If this happens, then too much water will be filling up your brine tank. Check your float levels and see if they are set too high. If they are, adjust them to a lower level.
What should the salt level in a water softener tank be?
Open the lid and check the salt level. To maintain consistently soft water, keep your salt tank at least half-full at all times, but do not overfill. The level of the salt should remain above the water level.
How do I set the salt level monitor?
To set this monitor system: Lift the salt hole cover and level the salt in the storage tank (press tank light button to light inside of tank). The salt level decal, on the brine well inside the tank, has numbers from 0 to 8 (see drawing on page 9 and below). Observe the number the leveled salt is at or closest to.
What does error code 1 on Kenmore water softener mean?
Error code #1, meaning a valve motor failure, is one of the more common codes you will have displayed. If your Kenmore water softener display is showing Error Code #1, you can try the following: Step 1: Unplug your softener and then plug it back in.
