Why does my apartment toilet keep clogging?

Probably the most common plumbing problem in apartments (and other buildings) is a clogged toilet. Clogs can occur for multiple reasons, including accumulation of paper and other material in the drain pipes or broken sewer lines. In many cases, a simple toilet plunger may be the solution to the problem.

What causes frequent toilet clogs?

Excess waste and toilet paper or non-flushable items can become lodged in the toilet trap after they are flushed. When there is a significant mass stuck in the toilet trap, the toilet keeps clogging as normally flushed material is more likely to catch and clog.

Why does my sewer keeps clogging?

While minor clogs can be cleared away with household tools, frequent clogging often suggest that you have a major clog developing in your drain line. Major clogs often form over months or years through the accumulation of soap residue, fats, hair, and other organic debris.

Does apartment maintenance unclog toilets?

Clogged toilet is always the tenant’s responsibility, unless the landlord was over there pouring his bacon grease down the sink or flushing his sanitary supplies or childen’s toys down the toilet. The number one cause of drainage clogs in rentals is tampons.

What to do if your flushometer won’t stop flushing?

If the flushometer won’t stop flushing on your toilet, you can easily fix it by cleaning out the gasket. For a manual flushometer, first, take a flat screwdriver and turn the screwdriver slot that sticks out to one side, which will turn off the toilet’s water supply. Then, take a wrench and screw the top lid off the flushometer.

What causes a flushometer to overflow at night?

Because the pressure within a building’s plumbing system fluctuates, with higher pressure often occurring at night, when the building experiences low or no use overnight. This pressure, without a control stop in the fully open position, will cause the flushometer to overflow the urinal with water.

What happens when you flush a toilet with a clogged trap?

Due to that design most of the things that fall in the bowl can be removed, and if flushed clogs the toilet at the trap. When your trap is fully clogged, it will not drain water and the toilet may start to overflow. A partially clogged toilet trap will drain the water slowly but will not flush properly.

What do I do if my toilet flapper keeps clogging?

Replacing a flapper isn’t really a big project, even for someone who isn’t particularly handy. It’s just a matter of draining water from the upper toilet tank, turning off the water supply, disconnecting and removing the old flapper, and installing and connecting the new one.

Why does my toilet keep clogging when I flush?

The toilet’s flapper allows water to flow from the tank into the toilet bowl. It needs to open all the way in order to release enough water to enable a proper flush each time. Which could lead to material remaining in the toilet that leads to clogging and additional flushing to clear it.