Where is the termination point of a vent?

The vent system shall terminate at least 4 feet (1219 mm) below, 4 feet (1219 mm) horizontally from or 1 foot (305 mm) above any door, window or gravity air inlet into the building. The vent termination point shall not be located closer than 3 feet (914 mm) to an interior corner formed by two walls perpendicular to each other.

Where is the proper location for a kitchen vent?

Your concern with the vent hood termination location for the proposed kitchen range hood is a perfect example of such an issue. In a typical home, the vent hood for this appliance would be surface-mounted on an exterior kitchen wall, not far from the exhaust fan unit itself.

How is the location of a gas vent determined?

The safe location of any vent to atmosphere will be dependent on the venting conditions, the hazards associated with the gas at the vent conditions, the vent use frequency, and environmental considerations resulting from the gas being released.

Where does a vent terminate in an air conditioner?

Vents shall terminate at least 3 feet (914 mm) above any forced air inlet, other than the forced air inlet for the subject direct vent or integral vent appliance, located within 10 feet (3048 mm).

What are the code requirements for plumbing vent terminations?

These standards are at Section “P3103 – Vent Terminals” of the Residential Edition of the Florida Building Code (FBC) and the International Residential Code (FBC). Also see our blog post How many plumbing vents through the roof are required by code?

Where does a gas vent have to be located?

The vent termination shall be located a minimum of 4 feet from the lot line or from adjacent buildings. The termination shall be installed in accordance with the gas vent manufacturer’s listing and installation instructions.