When was the Rinnai 26 hot water unit installed?
I had a Rinnai 26 installed in October last year, the plumber made a big noise about the unit being limited to 50 degrees during the installation. I ran the cables and mounted the bathroom and kitchen controllers one weekend and he came back to wire them in.
Is the Rinnai tankless water heater still working?
I have a Rinnai tankless RC80HPi water heater. It was installed in my house back in 2009. It has been working flawlessly up until about 2 weeks ago. Then all of a sudden while trying to run hot water in either of the showers or in the kitchen sink, the hot water would start cycling between cold and hot.
Why is my Rinnai Infinity 26 not hot enough?
The thing with instant units is that they need to lift the water temperature as its flowing through the unit. In winter the starting water temperature is lower and the desired output temperature is typically higher. i.e. lower performance but this shouldn’t really be an issue for the Infinity 26.
Which is the most energy efficient Rinnai Water Heater?
Enjoy superior comfort with reduced running costs, as no energy is consumed by the unit until you turn a tap on. With an impressive 6 star energy rating, the Rinnai 26 the most energy efficient 26L continuous flow hot water system on the market.
I have a Rinnai tankless RC80HPi water heater. It was installed in my house back in 2009. It has been working flawlessly up until about 2 weeks ago. Then all of a sudden while trying to run hot water in either of the showers or in the kitchen sink, the hot water would start cycling between cold and hot.
The thing with instant units is that they need to lift the water temperature as its flowing through the unit. In winter the starting water temperature is lower and the desired output temperature is typically higher. i.e. lower performance but this shouldn’t really be an issue for the Infinity 26.
Why does my Rinnai Water Heater have code 10?
Remove burner and inspect copper fins in heat exchanger for a build up between fins. This will cause air flow restrictions which can lead to code 10’s. If build up is present, you will need an air compressor capable of delivering 120 psi of air to blow out the burner and heat exchanger fins.
Is there an error code on my Rinnai tankless?
No code. Tried flushing the unit but that didn’t help. Unit makes a loud rumble (very loud) when it kicks on. This was the only issue for maybe a week or so. Today it started kicking on/off while calling for hot water.
What are the dangers of a Rinnai Water Heater?
WARNING ABOUT HOT WATER Hot water can cause scalding. Those most at risk are children and disabled, elderly and infirm persons. (65°C water can severely burn a child in half a second). Rinnai have water heater models which limit the delivery temperature to 50°C which significantly reduces the scald hazard.
Is the Rinnai B24 50 deg C compliant?
The model code of the Rinnai B24 it is fitted to is REU-VR2426WB-50-AK (50 deg C Compliant models have “50” added as a suffix). Very grateful for your interest. smeagols ghost writes… Mine has a big block of epoxy over the Dip switches. It seems that it is possible to get around this obstacle see: .:IM:.
Can you change the temp on a Rinnai?
It is definitely possible to alter the maximum temperature on Rinnai models that are NOT marked as “50 deg C Compliant”. The question is whether this can be done on models that ARE “50 deg C Compliant”.
When does the Rinnai B26 hot water tap ignite?
Write a review on ProductReview.com.au ! The Rinnai B26 does not immediately ignite when a hot water tap is opened.
Can a Rinnai hot water heater be changed to 50 deg C?
Also, at page 6 of the Operation / Installation Manual applicable to this model, it is explicitly stated that the preset 50 deg C factory maximum delivery temperature CANNOT be changed, even by an “authorised” person.
What do you need to know about Rinnai Water controllers?
Total home comfort at the touch of a button – the Rinnai range of controllers are flexible and simple to use allowing you to keep in control of your Gas Ducted heater, Evaporative cooling or Add-On Ice. To make the most of your Rinnai Continuous Flow hot water experience, we suggest installing of at least one of our Rinnai water controllers.
How many showers can you take with Rinnai B26?
Hi, our brand new Rinnai B26 is giving us Lukewarm water, which is unbearable in cold weather. We were told by the company that we can use 3 showers at a time but we are not even satisfied by 1 shower at a time, the water gets cool from Lukewarm very quickly, please help what to do?
