What size nipple do I need for a tub spout?
If you have a FRONT-END threaded spout, measure from the wall to the end of the nipple to get the appropriate size. If you have a WALL-END threaded spout, your threaded nipple should be a maximum 1/2″ in length. If you have a TELESCOPING threaded spout, your nipple should be a maximum 1-3/8″ in length.
Are there different lengths of tub spouts?
Tub spouts come in all sizes. There is no one correct pipe length for a tub spout. Because spouts are different sizes and the plumbing behind the wall is installed at different depths, it’s necessary to measure and purchase or make a pipe when installing a new spout.
Can you put SharkBite over solder?
It is recommended to solder any joints prior to installing a SharkBite fitting. The heat from the torch can be transferred through the pipe and potentially damage the O-ring.
Is there a 4 in 1 tub spout adapter?
Includes assembly tool. 4 in 1 tub spout adapter. Use in 1/2-Inch copper pipe, 1/2-Inch and 3/4-Inch pipe thread. 4 in 1 tub spout adapter. LASCO 08-1061 Bathtub Spout Adapter, Four In One, Adapts Front Threaded, Regular Or Diverter Spouts From Front to Rear Threads, Slip Fit For Copper.
How big of a pipe do I need for a bathtub spout?
OD) copper pipe the length of the pipe must be a minimum of 1″ and a maximum of 2″ from the wall. For connection to 1/2″ mpt the length of the pipe from the finished wall must not be longer than 1 1/2″ or less than 5/8″.
Can a telescoping tub spout be adjusted?
A. Telescoping tub spouts can be adjusted by tightening or loosening the telescoping nipple inside the spout. To do this, rotate the nipple left or right a few turns to adjust the spout inlet’s depth as needed.
What is the LASCO four in one spout adapter?
Product Description. LASCO 08-1061 Bathtub Spout Adapter, Four In One, Adapts Front Threaded, Regular Or Diverter Spouts From Front to Rear Threads, Slip Fit For Copper. One size fits all. Use with front thread spouts. Includes assembly tool. 4 in 1 tub spout adapter. Use in 1/2-Inch copper pipe, 1/2-Inch and 3/4-Inch pipe thread.
