What size Allen wrench fits a Moen faucet?
Moen Renzo faucets require a 7/64-inch hex wrench for removal or repair. Handle screws for all Moen one-handle kitchen faucets also use 7/64-inch hex wrenches.
What does a hex wrench look like?
The Allen wrench itself is a small L-shaped wrench with six sides. If you look at a cross-section of the Allen wrench, it looks like a hexagon. When you need to use the Allen wrench, stick the short end of the L shape into the bolt head and press down on the longer side of the L to turn the bolt.
What kind of wrench do I need to remove Moen faucet handle?
Use a small six-sided Allen wrench to remove the hex screw that attaches the handle to a faucet’s valve stem. Moen, like many manufacturers of plumbing supplies, offers faucets whose handles attach to the faucet’s valve stem via a hex screw, a screw whose head has a six-sided hole that fits a hex wrench or Allen wrench.
What is the model number of a Moen faucet cartridge?
For more information about your Warranty, please visit our Warranty Information page. Most Moen cartridge part numbers, also referred to as Model numbers, are within the 1200 series. However, there are exceptions. Cartridge 1255 – Single Duralast® cartridge. Includes plastic retaining nut. Watch the 1255 Cartridge Removal & Installation Video:
How to replace a Moen Roman tub valve cartridge?
Watch the Servicing the 1258 Duralast Cartridge in Roman Tub Valves Video: In addition, depending on the faucet model you have, your cartridge removal and new installation may require the following tools. These tools are purchasable here at Moen.com. Simply click on the link or the picture to add them to your cart.
Can a hex screw be turned with an allen wrench?
Most spray lubricants are flammable, and while a small flame from a hex screw probably won’t hurt you, it will definitely damage the finish on the faucet. If applying heat doesn’t work by itself, wait until after the screw has cooled before applying it and attempting to turn the screw with your Allen wrench.
Use a small six-sided Allen wrench to remove the hex screw that attaches the handle to a faucet’s valve stem. Moen, like many manufacturers of plumbing supplies, offers faucets whose handles attach to the faucet’s valve stem via a hex screw, a screw whose head has a six-sided hole that fits a hex wrench or Allen wrench.
For more information about your Warranty, please visit our Warranty Information page. Most Moen cartridge part numbers, also referred to as Model numbers, are within the 1200 series. However, there are exceptions. Cartridge 1255 – Single Duralast® cartridge. Includes plastic retaining nut. Watch the 1255 Cartridge Removal & Installation Video:
What do you need to install Moen 1200 cartridge?
Next, the basic steps are to disassemble the handle, remove the cartridge, reinstall the new cartridge, and test your water. You should have the following tools available to you before you start: adjustable wrench, channel-lock pliers, open-ended wrench, safety glasses, flashlight, and screwdrivers.
Where to find series number on Moen single handle spout?
Single/Two Handle The series number may be stamped on the back side of the spout, near the base where it swivels on the sink. If you point your spout aerator (where the water comes out) so that it is facing the 3 o’clock position, the series number should be located on the opposite side at the 9 o’clock position.
