What should the temperature be in a Kohler shower?
You’ll then need to turn the valve stem and collar clockwise; this should initiate the hot water’s flow. Be careful of splashing yourself since the water may be too hot. Check the temperature with a thermometer. It should never exceed 120 degrees Fahrenheit.
Where is the handle on a Kohler shower?
Look for a screw connecting the handle to the faceplate (usually located under the curve of lever handles) and remove the screw with a screwdriver or an Allen wrench if needed. Set the hardware aside, taking note of where each piece came from, and remove the handle from the faucet so you can better access the faceplate.
How do you turn off the water in a Kohler shower?
Slide the collar onto the valve stem with the set-screw seated against the tab on the regulator housing. Slide the O-ring onto the valve stem until it is seated against the collar. Turn the valve stem counterclockwise to turn off the water. Install the faceplate and screws. Install the adapters, inserts and sleeves in the proper order.
Where is the caution tag on a Kohler shower?
The O-ring is a small ring around the stem, the caution tag will be situated below it and the collar is a red (sometimes black) ring located beneath the first two parts. Set these aside, rotate the valve stem as described above and then reattach the collar to the appropriate setting.
How to adjust the temperature on a Kohler k-994?
Stillness K-994-4 (discontinued) and K-T97344–*. Purist K-10129-4 (discontinued) and K-T97328–*. Using a flat-blade screwdriver, remove the plug button in the handle. Using a hex wrench, loosen the setscrew in the bottom of the handle and remove the handle.
What should the water temp be in a Kohler shower?
NOTE: The water temperature should never be set above 120 degrees F. Remove the handle and trim from the wall to expose the cap assembly (Fig. 1). Remove the black o-ring, caution tag, and red collar from the round brass stem; older model will have a black collar (Fig. 2).
How do you adjust the temperature of a Kohler Water Heater?
Turn the valve on and test the water temperature with a thermometer. Continue to reposition the red limit stop until the desired maximum water temperature is achieved. Reinstall the brass stop, making sure that the external screwhead is in the same location as before the stop was removed.
Where can I find the correct Kohler part?
Find the correct Kohler Genuine Part by entering your Kohler product number or name. Tip: Did you purchase your product on Kohler.com? Great! Check Order History to find your product number.
