What should the pressure be on a Vokera boiler?
between 1 and 1.5 bar
The pressure gauge shows the current pressure of the system, the gauge should be set between 1 and 1.5 bar. When the appliance is operating the gauge may rise or fall slightly, this is quite normal. The minimum permissible level for the safe and efficient operation of the appliance is 0.5 bar.
How do you reset Vokera Excel 25 boiler?
To reset your Vokera boiler, move the mode selector switch to the ‘OFF/RESET’ position and then move it back to either ‘hot water only’ or ‘heating and hot water’. Should this reboot get your boiler working again then you’ll know because there will be a constant green light.
How do I fix the water pressure on my boiler?
Top tip!
- Switch off and allow your boiler to cool.
- Double-check that both ends of the filling loop are securely attached.
- Open both valves, to allow cold mains water into the system (you should hear it)
- Wait for the pressure gauge to read 1.5 bar.
- Close both valves, one after the other.
How do I adjust the water pressure on my boiler?
Locate the filling loop, often found on the underside of your boiler. Open both valves to allow water into your heating system. Keep an eye on the pressure gauge and close the valves when the pressure reaches 1.5 bar. Switch on your boiler and reset the fault code (if necessary).
What does a red light mean on a vokera boiler?
Vokèra boilers with a digital display will show an error code alongside the red light which will help to get to the root cause faster than the boilers without a display. A common Vokera boiler fault code is A01 which means that the boiler has failed to ignite.
Why is there no hot water in my vokera boiler?
Vokera Flowmatic boilers: no hot water The Fault: With older Vokera Flowmatic boilers, one of the most common faults is finding that there’s no hot water, water is lukewarm, or the water only gets warm if your heating is on. This problem can be isolated to a faulty diverter valve.
Where is the mode selector switch on a vokera boiler?
Depending on boiler model you purchased and the time of the year (winter/summer) you will be able to choose/activate one (central heating) or two modes (central heating and hot water mode). In order to set the proper mode you should use “mode selector switch”. Its position is indicated on the picture above
What kind of boiler does vokera by Riello use?
Vokèra by Riello has been providing reliable, high efficiency heating and hot water solutions for over 35 years and today we offer a comprehensive range of domestic gas boilers to suit all homes. Below are the different types of boiler we provide. Please browse through our range to find the model that best suits your requirements.
Vokèra boilers with a digital display will show an error code alongside the red light which will help to get to the root cause faster than the boilers without a display. A common Vokera boiler fault code is A01 which means that the boiler has failed to ignite.
Is the vokera compact SE central heating boiler reliable?
Dear Customer Your Vokèra Compact SE boiler has been designed to meet and exceed the very latest standards in gas central heating technology, and if cared for, will give years of reliable use and efficiency. Please therefore take some time to read these instructions carefully.
How do you reset a vokera hot water boiler?
To reset your Vokera boiler, move the mode selector switch to the ‘OFF/RESET’ position and then move it back to either ‘hot water only’ or ‘heating and hot water’. Should this reboot get your boiler working again then you’ll know because there will be a constant green light.
Why does my vokera boiler keep going into lockout?
A constant red light on your Vokèra boiler means that the unit has gone into lockout for safety reasons. Some of the possible faults behind this include: Potentially harmful flue gases aren’t being expelled due to an issue with the fan.
