What kind of shower trim does Kohler use?

Devonshire® 2.5 gpm single-function showerhead with Katalyst® air-induct… Devonshire® Rite-Temp® bath and shower trim with NPT spout and 2.5 gpm s… 0.0 out of 5 stars. Devonshire® Valve trim for thermostatic valve with lever handle, require…

How can I tell if my Kohler shower diverter is working?

If your Kohler shower diverter is working properly, water should come out of only either the showerhead or bathtub faucet, but not both. If you have tried tightening the diverter and the leaks have continued, you may need to take additional action. If you have a system involving three knobs, the center knob is likely your diverter valve.

Is it possible to remove a restrictor in a Kohler shower?

We have a Kohler Kelston showerhead, model number K-T13492-4. I have also read that it could be a restrictor in the Kohler RiteTemp pressure-balancing valve. Does anyone know anything about this and if its possible to remove a restrictor there? Thanks!

Why does my Kohler shower head not flow?

The problem seems to lie with the showerhead itself: when I remove the showerhead and hose from the shower wall and turn on the water, the flow is much stronger. I’ve checked for debris, and it doesn’t seem to be a problem.

How do you remove a Kohler shower handle?

Using a Phillips screwdriver, unthread the two screws and remove the handle sleeve, shroud, and faceplate. If applicable, use a flat-blade screwdriver to remove the pin from the adaptor. Unthread and remove the adaptor from the valve.

When did Kohler replace the k-305 shower valve?

The K-305 valve was discontinued June 2010 and replaced by the K-11748 valve. Excessive inlet pressure can also contribute to a leak or drip issue. If suspected, turn the pressure by adjusting the stops or installing a pressure reducing valve in the supply system.

What happens when you remove the flow restrictor on a Kohler shower?

The restricter that is supposed to lower pressure to 2.5 gpm then lowers it much further, leaving one shivering under a trickle. Removing the restricter does not lead to eco-sin!

Purist® Rite-Temp® pressure-balancing bath and shower trim set with push… Purist® Rite-Temp® bath and shower trim with cross handle and 1.75 gpm s… Purist® Rite-Temp® pressure-balancing bath and shower faucet trim with p… Purist® Rite-Temp® bath and shower trim with lever handle and 2.5 gpm sh…

How to identify single control Bath and shower valve?

This allows you to expose the valve for proper identification. For assistance with removing the trim, refer to “Identify and Remove Single-Control Bath and Shower Trim”. Once the trim is removed, refer to the information below to identify your shower valve.

What kind of pressure balancing unit does Kohler shower use?

Valve cartridge GP30413 may resolve leaking from the showerhead or spout. Pressure Balancing Unit (PBU), if included, GP800820 may resolve temperature issues.

What kind of PBU does a Kohler shower valve have?

The valve had a PBU with smooth o-rings. The K-2971 has a PBU with notched o-rings. The PBU GP1144925 is interchangeable and used with both the K-306 and K-2971. Black mixer cap has 2 screws located at 3 and 9 o’clock that screw the cap to the brass valve body. The square brass stem rotates clockwise to turn on. Manufactured from 1997-2004.

What kind of shower valve does Kohler use?

Cartridge features square metal stem. Cartridge held in place by a bonnet. Sculpted acrylic handle lifts up, then rotates left to right to adjust temperature. Came as a pressure balanced and non-pressure balanced option. Valve cartridge GP30413 may resolve leaking from the showerhead or spout.

How to identify single control Bath and shower valves?

Identify a Single Control Bath/Shower Valve Finding a KOHLER or STERLING Product Model Number or Serial Number Rite-Temp K-304 Service Part Installation Instructions Identifying and Removing Single-Control Bath and Shower Valve Trim Identifying Your Faucet Model TOP Kohler.com homeSign up for NewsletterFind a storeLegalPrivacyCookie Policy

Where is the mixer Cap on a Kohler shower valve?

Another resource to help you identify your bath/shower valve is this interactive flow chart that will guide you through the identification process. Black mixer cap has 2 screws located at 3 and 9 o’clock that screw the cap to the brass valve body. Features a red or black temperature limit stop attached to stem of the mixer cap.

Is the Kohler luxstone shower a walk in shower?

Set the temperature, toggle between showerheads and so much more. Each feature in the LuxStone shower is designed by Kohler and engineered for a luxurious walk-in shower experience. Build the shower you’ve always dreamed of today. What Is Your Shower Design Style?

What are the different types of Kohler Bath faucets?

Revival® bath faucet with diverter spout, traditio… Stillness® Deck- or wall-mount high-flow bath valv… Trend® bath faucet metal handles, direct sweat uni… Trend® bath faucet sculpted acrylic handles and NP… Trend® bath faucet sculpted acrylic handles and di…

Where is the Black mixer Cap on a Kohler shower?

Cartridge (GP800881) may resolve leaking from showerhead/spout or temperature issues. K-8304-K-NA Service Parts information. Black mixer cap has 2 screws located at 3 and 9 o’clock that screw the cap to the brass valve body.