What is the fault coding on the micron FF boiler?
The installation and servicing manual for the Micron FF boiler (Instructions for Use, Installation and Servicing) has a page showing LED fault Coding. Unfortunately, several of the terms used in the fault finding chart are unintelligible nonsense, but we’ll come to those. The chart refers to Slow Flashing and Fast Flashing.
What was the problem with the micron 30FF boiler?
The problem was with a Glow-worm Micron 30FF boiler which would not fire up and which had both LED lights flashing alternately. The installation and servicing manual for the Micron FF boiler (Instructions for Use, Installation and Servicing) has a page showing LED fault Coding.
What does non volatile lockout on micron boiler mean?
“Non-Volatile Lockout” means overheat. “Phase Error (Blocking)” means electrical polarity (boiler wiring) is wrong. “Software Error” means PCB failure. I have no idea what “Other Errors” are!
What is the thermistor fault code on glow worm?
After a few days the new PCB started to produce other fault codes, sometimes an ignition lockout code but more frequently a thermistor fault code with a slow flash on LED 1 and a fast flash on LED 2 (LED 1 is the RESET LED and LED 2 is the BURNER LIT LED). Both LEDs were flashing simultaneously.
The installation and servicing manual for the Micron FF boiler (Instructions for Use, Installation and Servicing) has a page showing LED fault Coding. Unfortunately, several of the terms used in the fault finding chart are unintelligible nonsense, but we’ll come to those. The chart refers to Slow Flashing and Fast Flashing.
The problem was with a Glow-worm Micron 30FF boiler which would not fire up and which had both LED lights flashing alternately. The installation and servicing manual for the Micron FF boiler (Instructions for Use, Installation and Servicing) has a page showing LED fault Coding.
What does F16 display on my boiler mean?
If F16 displays on your boiler, there’s a flame detection fault with your boiler. Turning the hot water tap calls the printed circuit board (PCB) into action, telling the burner to fire up so that the water can be heated, which involves the gas valve supplying sufficient fuel.
What to do if your glow worm boiler has fault code F9?
The Fix: Check the pilot assembly is clean and free flowing from the gas valve. If so, replace the flame detection probe and lead. 2. Fault code F9 Next is the dreaded F9 code. The main problem here is that it’s a very generic code which can point to a few different faults relating to pressure, circulation and diverter valve issues.
How many times does a micron LED flash in 10 seconds?
Fast Flashing is 80 times in 10 seconds. The fast flash is too fast to count but you should be able to distinguish between the two as it’s four times faster than the slow flash. The Micron 30FF boiler with the problems had both LED 1 and LED 2 flashing alternately, each flashing 20 times in 10 seconds.
What’s the benefit of a 50 micron filter?
Filters that are 50 micron only filter out particles that can be seen with the human eye. Still, this rating is able to filter debris the size of the diameter of human hair and larger. The main benefit for this micron rating is that it filters a lot from liquid without the clogging issues that come with smaller microns.
Fast Flashing is 80 times in 10 seconds. The fast flash is too fast to count but you should be able to distinguish between the two as it’s four times faster than the slow flash. The Micron 30FF boiler with the problems had both LED 1 and LED 2 flashing alternately, each flashing 20 times in 10 seconds.
