What is br30 vs par30

The number following the letters in a recessed light bulb indicates size: it’s the diameter of the light bulb in eighths of an inch. So, a BR30 is 30/8 inches, or three and 3/4 inches. … The PAR denotes the light bulb has a parabolic aluminized reflector on its inside, directing light out.

Is BR30 same as par 30?

Notice that a PAR30 is the same diameter as a BR30 bulb. You can swap these bulb types to change from wide to spot, depending on what you need in each location.

What does PAR mean in flood lights?

PAR stands for “parabolic aluminized reflector.” These bulbs have a lamp, reflector, and pressed lens inside the lamp to provide directional lighting.

What are PAR30 bulbs used for?

PAR30 bulbs are commonly used in both recessed lighting fixtures and track lighting, so they come with short neck and long neck options to accommodate this usage. PAR30 short necks are more often used in track lighting while the long necks are often used in recessed lighting cans.

Can I use a BR30 bulb in a lamp?

The bulbs can be fitted into almost any household fixture, whether it be a ceiling fixture or a lamp. Meanwhile, BR30 bulbs offer directional lighting that points light straight ahead, making them better suited to recessed fixtures and can lights.

Where can I use BR30 bulbs?

BR30 light bulbs deliver soft-edged, directional light and can typically be found in general household light fixtures, recessed can lighting, and/or track lighting. Their lighting is less precise and produces less shadow than PAR bulbs, but they are great for fixtures that use dimmer switches.

Is BR30 the same as E26?

The BR30 is for an E26 light socket, while the A19 is for an A19 socket. The E26 is a smaller / thinner socket and is a lot less common than the A19. … Br30 is a wide end ‘flood type’ bulb designed to replace br30 bulbs common in recessed ceiling light fixtures.

What type of bulb is a PAR30?

What are PAR30 Bulbs? Parabolic aluminized reflector (PAR) 30 bulbs control light more precisely. They produce about four times the concentrated light intensity of general service A shape incandescents, and are used in recessed and track lighting.

Can I use PAR30 instead of PAR20?

PAR30, PAR20, and PAR16 bulbs are great replacements for incandescent bulbs but can easily replace other LED bulbs, such as BR (Bulged Reflector) bulbs. PAR Bulbs and BR bulbs are virtually interchangeable as far as the fixture, but the type of light they produce is much different.

What is the difference between PAR and BR bulbs?

PAR stands for “parabolic aluminized reflector” and is best used in settings that require a focused, narrow beam of light. Most PARs do not exceed a beam angle of 45 degrees in most cases. BR stands for “bulged reflector” and is considered a wide-angle floodlight often exceeding 100-degree beam angles.

Article first time published on

What is a BR30 flood light?

BR30 lamps are a type of lamp approximately 5 inches long and slightly less than 4 inches in diameter. They belong to category of directional lighting types, with typically a “wide flood” beam angle. … So, the “30” indicates a lamp diameter of 30/8 inches, or 3.75 inches.

What is a BR30 light?

What are R/BR30 Bulbs? Reflector (R) or Bulged Reflector (BR) 30 bulbs have a reflective coating on the inside of the bulb that directs light forward. … Like all light bulbs, the 30 value represents the diameter of the bulb in 1⁄8 of an inch. Therefore, a R30 is 3.75 inches in diameter.

What is the difference between R and BR bulbs?

BR bulbs are descendants of the R-shape bulb and therefore very similar in shape. However, the “Bulged Reflector” bulb (abbreviated as “BR”) includes an extra reflector in the neck of the bulb to better capture and cast light forward which was previously lost in the neck and sides of the standard R bulb.

Is BR30 Dimmable?

Philips BR30 LED flood light bulbs provide 650 lumens of soft white, dimmable light, equivalent to 65-watt incandescents with 80% less energy use. These bulbs fit standard medium base (E26) fixtures and are ideal for recessed can style lights.

Is BR30 brighter than A19?

LIFX A19 – Wi-Fi Smart LED Light Bulb While it isn’t great as a floodlight, the A19 shape disperses light more evenly than the BR30. This is the bulb to buy for lamps or ceiling fans, especially if you need more than one.

How large is BR30 bulb?

Like all light bulbs, the “30” figure represents the bulb’s diameter in 1⁄8 of an inch; therefore, a BR30 is 3.75 inches in diameter. BR30 is one of the best applications for LED due to its directional nature.

What base is BR30?

Medium base (E-26) | BR30 | Incandescent Light Bulbs.

Is BR30 a standard?

A19 and BR30 are simply two different standardized shapes for light bulbs. … The digits that follow the A, refer to the diameter of the bulb – measured in eighths of an inch. The BR30, however, has a flat end which is better equipped to provide directional lighting.

Does bulb shape matter?

The letter indicates the shape of the base, while the number indicates the size. Always check your lighting fixture before purchasing bulbs. … Sizes and shapes do matter – so be mindful before purchasing a new bulb.

What is soft white vs warm white?

Color temperature Soft white (2,700 to 3,000 Kelvin) is warm and yellow, the typical color range you get from incandescent bulbs. … Warm white (3,000 to 4,000 Kelvin) is more yellowish-white. These bulbs are best suited for kitchens and bathrooms. Bright white (4,000 to 5,000 Kelvin) is between white and blue tones.

Will a BR40 fit in a 6 inch can?

Where can I use a BR40? Typically BR40’s are used in 6-inch recessed can fixtures in the ceiling. 6-inches is the diameter of the opening of the recessed cans. 5-inch recessed cans will be difficult to fit since the diameter of a BR40 is already 5 inches.

What is E26 base?

The term E26 refers to a light bulb’s cap or base – the bulb component that allows for both electrical and mechanical contact. The letter “E” in E26 refers to Edison Screw, the most standard of lamp bases, while the numerical “26” refers to its diameter in millimeters (approximately 1 inch).

Will a BR30 fit an BR40?

The 30 and 40 refer to the size of the bulb in 1/8 inches — 30/8 and 40/8 inches respectively. … For 4″ cans, you cannot choose BR40 bulbs — they’re too big. For 5″ cans, a BR30 will fit with a little space to all sides while a BR40 will fit with little to no space on the sides.

What is the difference between par 30 and par 38 light bulbs?

PAR30 bulbs are great for larger rooms where multiple light fixtures are being used. Short neck PAR30 bulbs are more common for tracking lighting while long neck PAR30 bulbs are useful for recessed cans. PAR38 BULBS are primarily used for outdoor lighting. PAR38 bulbs can be used as general flood and safety lights.

What is a par 38 bulb?

What are PAR38 Bulbs? Parabolic aluminized reflector (PAR) 38 bulbs control light more precisely. LED PAR lights produce about four times the concentrated light intensity of general service A shape incandescents, and are used in recessed and track lighting. … Therefore, a PAR 38 is 4.75 inches in diameter.

What is par rating for light bulbs?

PAR (short for Parabolic Aluminized Reflector) bulbs are lamps with “spot light” features, meaning that they provide a beam spread that is typically lower than 45°. Use PAR bulbs when attempting to put a focused beam of light on an object such as in track lighting or illuminating artwork.

How long is a long neck PAR30?

Type of BulbAverage LengthWidth (Diameter)Long Neck PAR304.74 inches3.75 inches

What is the difference between par 38 and r40?

PAR38 will fit – the number denotes eighths of inches wide, so PAR38= 38/8″ width, or 4 3/4″w. A BR40 is 40/8″ inch wide, or 5″ wide. About the same size and will fit in the same fixtures.

What is the difference between PAR16 and PAR20 LED bulbs?

We mentioned that LED PAR16 Bulbs are the smallest in diameter of all the PAR Bulbs, and the PAR20 bulb is one size larger. While a PAR20 and a PAR16 Bulb can have the same base size, the dimension of the bulb is what differs. This is important when using existing fixtures because the fit might not be the same.

What is the difference between MR16 and PAR16?

The lengths of a PAR16 bulb and a MR16 GU10 fixture, however, are different. The MR16 GU10 fixture 2.10 inches long whereas a PAR16 lamp is 3.15 inches long. In short, a PAR16 lamp will fit in a MR16 GU10 fixture but part of the bulb will be exposed.