What happens if you use a plunger on a shower drain?
However, if no drain cleaning products seem to be working, then the plunger can save the day. A plunger will force pressurized water in both directions, which will help to effectively loosen whatever is clogging your shower drain.
What can I use to clear a clogged shower drain?
A plunger can also clear shower drain clogs. Remove the drain cover and put the rubber cup of the plunger over the drain opening. Apply some petroleum jelly to the edge of the cup if you have trouble getting a good seal. Then run enough water in the shower stall to cover the lip of the cup.
Do you need a plunger to plunge a shower drain?
All you need is a regular, rubber plunger. Follow the steps below to properly plunge your shower drain: Remove the cover on your shower drain. Some plates may be bolted down, in which you will need to unscrew the screws and remove the cover. Inspect the drain to see if you can see any clogs or debris within reach.
What should I do if my shower overflows?
Next, you will need to stop the showers overflow drain using a wet rag. This stuff is important and will help the plunger properly emit enough force to remove the clog. Now, place the plunger over the drain and fill your shower with a little bit of water so that the bottom of the plunger is covered.
Is there a way to unclog hair from the shower drain?
If you’re the type that hates to unclog the shower drain, maybe one of these methods will work for you. This method is fantastic for people who don’t want to put their fingers near all that hair. All you have to do is boil a pot of water on the stove, then pour that water down the drain. You can use a funnel or a pouring cup to make this easier.
Can a plunger be used to unclog a shower drain?
A plunger will force pressurized water in both directions, which will help to effectively loosen whatever is clogging your shower drain. Carefully remove the overflow plate by removing the two screws holding it down. Once you have removed the screws, you can gently remove the overflow plate and drain mechanism at the same time.
What to do if your shower drain is not working?
If water can’t flow through the shower drain, one of the simplest solutions is to use the old good cup plunger. Even our grandmothers solved drain problems with that simple rubber cup on a wooden handle. Nowadays, you can find a plunger with an extra rubber ring on the bottom, which is highly helpful in bringing up dirt from the drains.
What should I do if my shower screen is clogging?
Usually, a screwdriver is all that’s needed to dismantle the screen, stopper or cover. (Sometimes, a hair clog will come up with the screen or stopper and the problem is solved). Look down the drain to see if you can find what’s causing the problem. Turn on the overhead light or use a flashlight to inspect the drain.
Next, you will need to stop the showers overflow drain using a wet rag. This stuff is important and will help the plunger properly emit enough force to remove the clog. Now, place the plunger over the drain and fill your shower with a little bit of water so that the bottom of the plunger is covered.
