What does the ER stand for on a Kenmore refrigerator?
Kenmore elite refrigerator error code er co This error code stands for ‘communication error’ and occurs due to communication failure between the main control board (on the back panel) and display control board (on the freezer door). This may be due to poor wiring and/or loose connection.
What does the code mean on a Kenmore washer?
If the load is unbalanced, the washer will display this code while running an imbalanced load correction routine at the end of the wash cycle and before the final spin. If the code remains and the wash cycle dial is flashing after the recovery routine has stopped, open lid and redistribute the load.
What does the F5 error code mean for my Kenmore range?
What does the F5 error code mean for my Kenmore range 911.9598810? have a model 911.9598810 Sears Kenmore electric range. The burners work but the oven starts to pre heat and then it kicks off on a F5 code across the display Share it! Click to remove this tagging.
Why does my Kenmore refrigerator have an error code F DH?
Kenmore elite refrigerator error code f dh. Why it happens: this error code appears when the temp sensor shows temperature below 40F in defrost mode. This may be due to a faulty defrost heater, control board, or fuse. Locate it: unplug the refrigerator and check these elements.
Kenmore elite refrigerator error code er co This error code stands for ‘communication error’ and occurs due to communication failure between the main control board (on the back panel) and display control board (on the freezer door). This may be due to poor wiring and/or loose connection.
What to do if your Kenmore Washer has an error code?
Clear any debris or objects from the receiver. If the door lock receiver is clear, check the wire harness connections between the door lock/switch assembly and the main electronic control board. Reconnect any loose wires or replace the wire harness if damaged.
What does an error code ” DR ” mean on my Kenmore model 417?
Click to remove this tagging. The code “dr” means the control doesn’t see the door switch being closed. This can mean the door catch is broken or the door is bent and not shutting all the way or clothes are preventing the door from shutting all the way but most likely it means the door lock assembly needs to be replaced.
How to disable showroom display mode on Kenmore freezer?
No alarms sound. To exit the showroom display mode, unplug the freezer. Press and hold the Up and Down arrows at the same time while plugging the outlet cord back in. Press and hold the Alarm Reset button for 3 seconds to disable the control lock.
