What does priority mean on water heater?
When you press the “Priority button,” the green light will glow, indicating that the controller controls the temperature and that a water heater is ready. Rinnai water heaters work in the temperature range from 98 F to 140 F, while they come with the factory setting of approximately 120-125 F.
What is priority on Rinnai?
Adjusting Temperature Press the “Priority button” on the Controller you want to set the temperature with, and the green “Priority” indicator light will The outlet water temperature of the Rinnai Water Heater can only be adjusted by the user using the remote controller(s).
What to do if your water heater is beeping?
Check to make sure the gas is turned on at the water heater, gas meter or tank. Ensure the igniter is operational. If gas is being supplied to the tankless water heater and the igniter is working, call for an evaluation by a qualified plumber.
Why is my Rinnai tankless water heater beeping?
Press the “Priority button” on the temperature controller. The green Priority light will glow indicating that this controller is controlling the temperature and that the Rinnai Tankless Water Heater is ready to supply hot water. IMPORTAnT: The priority can only be changed while no hot water is running.
What does error code 49 on Rinnai Water Heater mean?
Rinnai error code 49 can be found on some Rinnai tankless water heater models like the RHFE 1004. The error code 49 means there is a problem with the pressure sensor. Check for loose connections and damaged or broken parts. Clean and remove any build-ups or obstructions.
What to do if your water heater stops working?
Make sure to treat hard water to prevent scale build-ups in the future. Pushing the temperature controller’s ON/OFF button five times will allow you to run the water heater even if you haven’t cleaned the heat exchanger. However, eventually, the water heater will stop working to prevent damage.
Check to make sure the gas is turned on at the water heater, gas meter or tank. Ensure the igniter is operational. If gas is being supplied to the tankless water heater and the igniter is working, call for an evaluation by a qualified plumber.
Press the “Priority button” on the temperature controller. The green Priority light will glow indicating that this controller is controlling the temperature and that the Rinnai Tankless Water Heater is ready to supply hot water. IMPORTAnT: The priority can only be changed while no hot water is running.
Why is there an error code on my Rinnai Water Heater?
If your Rinnai displays an error code 05, you need to restart the water heater and open the hot water faucet. This code is not observed on all Rinnai water heaters. Measuring the resistance of the bypass flow control can help in determining the problem. If the error code persists, you may need to replace the bypass servo.
What to do if your Rinnai heat exchanger keeps beeping?
How to Fix: Flush the heat exchanger as per the recommended flushing procedure found in the owner’s manual. To temporarily reset the code, press the ON/OFF button 5 times. This will allow the unit to operate for 70 hours after which another LC code will lock the unit from operating.
