What does Moen balancing spool do?
Product Description. The Moen Balancing Spool is a genuine Moen replacement part for Moentrol One-Handle tub and shower faucets. This chrome replacement Balancing Spool allows users to replace a faulty balancing spool that may be preventing their tub or shower faucet from maintaining comfortable water temperature.
How does a pressure balancing spool in a shower work?
It is no fun receiving a sudden blast of scalding hot or freezing cold water while taking a shower. The pressure balancing spool is a mechanism in the faucet or valve cartridge in your shower plumbing that adjusts water pressure accordingly to maintain a comfortable water temperature.
What’s the best way to remove a balancing spool?
To remove the balancing spool (#4), use a large flathead screwdriver to unthread the balancing spool (#4) from the valve body (#5). This will require about six full rotations before you can pull the balancing spool (#4) from the valve body (#5) (See Figure A).
How do you clean a balance spool Moen?
1. To remove the stop tube (#3), grab ahold of the stop tube (#3) and pull forward until it has been removed. 2. To remove the escutcheon (#2), use a Phillips screwdriver to remove the two escutcheon screws (#1).
Why does a pressure balanced faucet shut off hot water?
Since the valve is pressure balanced it will shut off the flow completely if there is no hot water under pressure. The pressure balanced valve is a critical element of a shower faucet which keeps water at a consistent temperature and protects the user from being scalded.
It is no fun receiving a sudden blast of scalding hot or freezing cold water while taking a shower. The pressure balancing spool is a mechanism in the faucet or valve cartridge in your shower plumbing that adjusts water pressure accordingly to maintain a comfortable water temperature.
To remove the balancing spool (#4), use a large flathead screwdriver to unthread the balancing spool (#4) from the valve body (#5). This will require about six full rotations before you can pull the balancing spool (#4) from the valve body (#5) (See Figure A).
How do you change the balancing spool on a hot tub?
A large flat-bladed screwdriver can be used to unscrew the balancing spool from the valve. There will be a spool inside this piece, and it needs to move freely inside of its shell. If the spool does not move freely, then the 1423 balancing spool will need to be replaced.
What’s the best way to clean a balance valve?
This will require about six full rotations before you can pull the balancing spool (#4) from the valve body (#5) (See Figure A). 1. Using a 50/50 solution of white vinegar and water, swish the balancing spool around in the solution and allow it soak for 5-7 minutes. Use a tooth brush to clean the outside of the balancing spool.
