What do I do if my stopcock is leaking?
Leaking head gear joint
- Turn off the water supply to the stopcock (do this by turning off the stopcock that’s outside your home)
- Drain the pipes by running the kitchen tap.
- Grip the body of the tap with water pump pliers.
- Use a spanner to turn the large nut in the centre of the stopcock anticlockwise to loosen it.
How much does it cost to change a stopcock?
THE COST OF GETTING A STOPCOCK REPLACED It usually costs between £100-400.
What to do when your plumbers stopcock is leaking?
If you can see water leaking from the compression nuts on either side of the stopcock, you may just need to tighten them. To do this, grip the body of the stopcock with the pliers and use your spanner to turn the compression nut in an anticlockwise direction.
Where is the second stopcock on a water pipe?
The second stopcock is inside and can be found at the point where the mains water pipe enters your home. This is often under the kitchen sink but could also be under the stairs or in a downstairs toilet. When this water stopcock leaks, if you own the property, it’s your responsibility to fix it.
How much does it cost to replace stopcock pipe?
Hidden costs come when you require anything special such as tile removed and fitted back or cupboards taken out and fitting back. Maybe the old Stopcock is on lead pipe and you need the lead pipe replacing. You may have 22mm pipe rather than the standard 15mm pipe in normal domestic house of 1 to 5 bedrooms.
Why is my stopcock on my water heater leaking?
A leaking gear head joint is the result of a broken or eroded washer. The washer is located at the base of the spindle and it is the mechanism that stops the flow of water To replace this, you will need to isolate the water to your home and drain the pipes as outlined above.
If you can see water leaking from the compression nuts on either side of the stopcock, you may just need to tighten them. To do this, grip the body of the stopcock with the pliers and use your spanner to turn the compression nut in an anticlockwise direction.
The second stopcock is inside and can be found at the point where the mains water pipe enters your home. This is often under the kitchen sink but could also be under the stairs or in a downstairs toilet. When this water stopcock leaks, if you own the property, it’s your responsibility to fix it.
Hidden costs come when you require anything special such as tile removed and fitted back or cupboards taken out and fitting back. Maybe the old Stopcock is on lead pipe and you need the lead pipe replacing. You may have 22mm pipe rather than the standard 15mm pipe in normal domestic house of 1 to 5 bedrooms.
A leaking gear head joint is the result of a broken or eroded washer. The washer is located at the base of the spindle and it is the mechanism that stops the flow of water To replace this, you will need to isolate the water to your home and drain the pipes as outlined above.
