What color should your pilot light be?
blue
The color of the pilot light should be blue because that means that only natural gas—without any other condensates—is reaching the pilot light through the gas main. The principal chemical compound found in natural gas is methane, and methane burns blue.
What color should my gas fireplace pilot light be?
A pilot light on a gas-burning appliance should be blue. Another flame color, especially yellow, means the appliance’s gas-to-air mixture is unsafe and needs to be checked.
Should a pilot light be orange?
Pilot light burns inefficiently. The flames from traditional pilot lights should burn a bright blue color. If your pilot light’s flame is orange or yellow, it is burning inefficiently due to a lack of oxygen.
What should a good pilot light look like?
A proper pilot flame should be blue with a yellow tip and should be strong enough to cover about 1/2 inch at the end of the thermocouple tip. If the flame is too strong and improperly adjusted, it will be blue but may be noisy and lift off the thermocouple, causing improper furnace operation.
How do I fix my orange pilot light?
Give the pilot tube a clean Turn off your boiler and make sure the pilot light is off. You can then give the pilot tube a clean with a nail, needle or other thin object but take care not to damage it. Once it’s clean, you can then turn your boiler back on and reset the pilot light.
What does yellow flame indicate?
A yellow flame indicates improper adjustment and a possibility of excessive carbon monoxide. Do not use the oven as a source of heat.
What should the color of a pilot light be?
Pilot lights should burn blue. When your furnace is functioning normally, the pilot light should burn a deep blue color. This is the natural color of a flame that is receiving an adequate amount of oxygen.
Why is my pilot light flame yellow instead of blue?
This is the natural color of a flame that is receiving an adequate amount of oxygen. When the amount of oxygen to a pilot light is restricted, it becomes a “lazy” flame and burns yellow instead of blue.
What does a pilot light do when it goes out?
You may even have been able to experience the thrill of relighting the pilot light when it goes out. Let’s take a look at how the pilot light works. The basic idea behind a pilot light is simple. Its purpose is to provide the flame needed to light the gas coming out of the main burner.
What’s the pilot light on a water heater called?
Pilot lights are still common, even though they’re a bit wasteful. If you have an older model furnace or water heater that uses natural gas, or if you have a set of gas logs in your fire place, you have probably seen the small blue flame known as the pilot light.
What does it mean when your pilot light is yellow?
Inefficient function. If your pilot light is burning but has a weak, yellow flame, it is not working efficiently enough. The pilot light flame should be blue, slightly tinged with yellow only at the tip — a sign there is enough heat to warm your water or your home.
What does a propane pilot light look like?
A propane flame should have a bluish-green flame with a tinge of yellow at the tip. Faulty thermocouple. If nothing is obviously wrong – the pilot light stays on and burns with an adequate flame – but your gas appliance is still not working, you could have a problem with the thermocouple.
Do you have a problem with your pilot light?
Do you have a problem pilot light? If the pilot light of your gas furnace, water heater, stove, or fireplace goes out numerous times throughout the year, you need to take action ASAP. You may be able to fix the problem yourself, but in some cases, you’ll need to call an HVAC pro for help.
What should the flame color be on a gas burner pilot light?
A pilot light on a gas-burning appliance should be blue. Another flame color, especially yellow, means the appliance’s gas-to-air mixture is unsafe and needs to be checked.
