Is there supposed to be a flame when hot water tank is on pilot?

Gas and propane fueled water heaters use a small flame to ignite the burner. This small flame is called a pilot light and it stays lit at all times. If the pilot light goes out, your water heater won’t be able to ignite the gas burner and therefore, won’t be able to heat the water.

What does the pilot light on a water heater do?

The Pilot Light is the heart of your water heater. It’s a small blue flame that burns petroleum gas to produce heat. Without this flame, there would be no heat, and thus no warm water. So, What Are The Reasons Your Water Pilot Light Keeps Going Out?

What should the pilot flame be on a propane tank?

Important: Before troubleshooting the pilot light, keep in mind that a pilot flame is always ON and the flame should be blue. If it is yellow, it needs an adjustment. Make sure that the tank is completely filled with water before lighting the pilot light.

Why is my gas water heater pilot light yellow?

Also, some homeowners reported that while they were cleaning the unit, a small orifice cap found on top of the pilot tube fell out making the pilot light unstable, yellow and very high. If the gas pressure is too low, the flame can become too small. Check with the utility company about this problem.

Is it dangerous if the pilot light goes out on the water?

This is how natural gas smells, and once you notice it, you must turn off the gas to the heater. Before taking such a dangerous matter into your own hands, try contacting the gas company, and wait for their instructions.

Why is the pilot light on my gas heater corroded?

Corroded Pilot Tip. Gas is funneled to the tip of a pilot light via a supply line that is connected to a natural gas or propane supply. As the gas passes through the tip of the pilot light, it is ignited by the action of the pilot light, which is either electronic or manual. Over time, this tip can become corroded with soot and residue,…