Is the Moen 1225 replacement cartridge the same as the 1225B?
The Moen Single Handle Replacement Cartridge 1225 is the same as 1225B only packaged differently. If you have additional questions, please feel free to call us at 800-289-6636.
What do you need to install Moen 1200 cartridge?
Next, the basic steps are to disassemble the handle, remove the cartridge, reinstall the new cartridge, and test your water. You should have the following tools available to you before you start: adjustable wrench, channel-lock pliers, open-ended wrench, safety glasses, flashlight, and screwdrivers.
Is the pivot retainer on Moen 1200 removable?
If you have the gray plastic pivot retainer and you DO NOT see a white plastic pivot stop inside, your gray pivot retainer is not removable. Pull up on the stem of the cartridge to relieve any pressure in the valve. Then remove the washer and limit stop.
How do you reinstall a Moen faucet cartridge?
Push the cartridge straight into the valve, making sure that the ears of the cartridge are lined up precisely with the clear tabs filling the front and back center openings of the valve body, or 12:00 and 6:00. To reinstall the cartridge into your faucet assembly, reverse the steps that you followed to remove the old cartridge.
The Moen Single Handle Replacement Cartridge 1225 is the same as 1225B only packaged differently. If you have additional questions, please feel free to call us at 800-289-6636.
Next, the basic steps are to disassemble the handle, remove the cartridge, reinstall the new cartridge, and test your water. You should have the following tools available to you before you start: adjustable wrench, channel-lock pliers, open-ended wrench, safety glasses, flashlight, and screwdrivers.
Where is the stem on a Moen faucet cartridge?
Inside the body of the cartridge, there is a stem that moves up and down for shut-off/flow volume, and rotates for hot/cold mix. Pulling up on the stem is supposed to pull out the cartridge.
If you have the gray plastic pivot retainer and you DO NOT see a white plastic pivot stop inside, your gray pivot retainer is not removable. Pull up on the stem of the cartridge to relieve any pressure in the valve. Then remove the washer and limit stop.
