Is the Aquamax gas hot water system still available?
Aquamax 200 has been discontinued. See all AquaMAX Gas Hot Water Storage Systems. See the Best Gas Hot Water Storage Systems in 2021 as rated by Australians on ProductReview.com.au. Your trust is our top concern. Companies can’t alter or remove reviews from ProductReview.com.au.
Is the Aquamax 200 gas water heater rustproof?
Our Aquamax 200 gas water heater has been running without a problem for 19 years. It is located outside in a salt laden coastal environment. It is reliable and seems to be rustproof. This is a very well built Australian product with a stainless steel tank and burner. Highly recommended.
Why does my Aquamax water heater go cold?
This is what is known as a “dead leg”. When it’s not being used, the water in the line goes cold and has to be drawn through before hot water is available at the tap. Keep the hot tap open a little longer to check if this may be the cause. If the problem continues, call AquaMAX Service on 1800 676 000 or your plumber.
How old is an electric Aquamax 250 litre?
We have an electric aquamax 250 litre which is 13 years old. Approx 8 weeks ago no hot water. Electrician came replaced the thermostat checked element was okay. 6 weeks later again no hot water, Electrician replaced element and put in a different brand. Got hot water for one day and now again not heating.
What kind of water heater does Aquamax use?
AquaMAX Five Star Gas water heaters have options to cover most needs. From our 5 Star Stainless… Our mains pressure, Electric Vitreous Enamel (or VE) water heaters offer flexible hot water… No front page content has been created yet.
Why is there no hot water in my Aquamax 205?
Our Aquamax 205 was gushing from the pressure relief valve. Replaced that now there’s hot water in the tank but the pilot light won’t stay lit and we get a max 20 seconds of hot water inside before it runs cold. Any help out there please?
We have an electric aquamax 250 litre which is 13 years old. Approx 8 weeks ago no hot water. Electrician came replaced the thermostat checked element was okay. 6 weeks later again no hot water, Electrician replaced element and put in a different brand. Got hot water for one day and now again not heating.
Why does my Aquamax only get 18 MV?
Only get 18 MV after replacing the thermocouple tested in workshop and got 40mv with map gas I can only assume pilot flame is poor, I checked the pilot tube and nozzle and it was clear, but pilot flame still appeared low could it be a regulator issue can the pilot pressure be increased or do I need to replace the regulator ? Pilot light stays on.
