How to replace Moen 1200 and 1225 cartridge?
Step by step, from beginning to end, I figure out how to disassemble the Moen bathroom faucet and replace/install a new Moen 1200 cartridge. Moen also allows the 1225 or 1225b cartridge in this sink, but the installation is exactly the same.
How do you reinstall a Moen faucet cartridge?
Push the cartridge straight into the valve, making sure that the ears of the cartridge are lined up precisely with the clear tabs filling the front and back center openings of the valve body, or 12:00 and 6:00. To reinstall the cartridge into your faucet assembly, reverse the steps that you followed to remove the old cartridge.
How do you reverse the hot and cold sides of a Moen cartridge?
Go to step 8 if you want to reverse the Hot and Cold sides. To remove the cartridge from your faucet assembly, first use a hex wrench to loosen and remove the screw from the front of the handle. Then, pull the handle off from the faucet. Unscrew the Philips screw and remove the adapter.
What’s the best way to clean Moen cartridge?
Clean the inside of the valve body with a soft bristled nylon brush (e.g. old toothbrush), to remove any mineral buildup. The next step will send a lot of water through the open valve. Use bowls or similar devices to redirect water from the open valve back to the sink or tub.
How do you remove a Moen cartridge from a Philips faucet?
Using a Philips screwdriver unscrew the handle screw. Pull the handle off from the faucet and pull the limit stop off. Remove the washer from the cartridge and use pliers to remove the retaining clip. Pull the stemp up on the old cartridge to relieve any pressure in the faucet.
What do you need to install Moen 1200 cartridge?
Next, the basic steps are to disassemble the handle, remove the cartridge, reinstall the new cartridge, and test your water. You should have the following tools available to you before you start: adjustable wrench, channel-lock pliers, open-ended wrench, safety glasses, flashlight, and screwdrivers.
What’s the warranty on a Moen faucet cartridge?
Most Moen faucets are backed by Moen’s Lifetime Limited warranty. For more information about your Warranty, please visit our Warranty Information page. CARTRIDGE INFORMATION. Most Moen cartridge part numbers, also referred to as Model numbers, are within the 1200 series.
Go to step 8 if you want to reverse the Hot and Cold sides. To remove the cartridge from your faucet assembly, first use a hex wrench to loosen and remove the screw from the front of the handle. Then, pull the handle off from the faucet. Unscrew the Philips screw and remove the adapter.
