How far from the wall is the Kerdi line linear drain installed?
approximately 2 1/8″ o.c.
It is installed directly against the wall, so that the channel body support is in contact with the wall. The drain outlet is approximately 2 1/8″ o.c. from the edge of the wall board.
What size is the Kerdi drain?
KERDI-DRAIN ADAPTOR KITS, available in 5 1/4″ (133 mm) and 7 1/2″ (191 mm) diameter sizes, are used to convert traditional clamping ring drains to integrated bonding flange drains when removal of the clamping ring drain is not practical (e.g. when they are set in concrete slabs).
Do you overlap Kerdi band?
KERDI sheets may be joined using a lap seam. This approach allows you to combine membrane installation and joint sealing in one step. Make sure that the second sheet of KERDI membrane overlaps the first by at least 2”—you can make sure this is accomplished by marking the sheet 2” from the edge.
What size is a Schluter shower drain?
They are available with standard 2″ (50 mm) and 3″ (75 mm) outlets and attached to the pipe using an appropriate solvent cement. The stainless steel drain casings are available with standard 2″ (50 mm) and 3″ (75 mm) no-hub outlets and are attached to the pipe using an appropriate mechanical no-hub coupling.
Can you use any drain with Schluter?
Can I use another manufacturer’s drain with your Schluter®-Shower System? The Schluter®-Shower System 10-Year Limited Warranty is void if other drains are used.
Can you put 2 KERDI shower pans together?
Yes. The KERDI-SHOWER- T/-TS/-TT trays can be cut to size to fit various applications. Ideally, the tray should be cut by equal amounts on all four sides to ensure a consistent height of the first course of wall tile.
Are Schluter shower pans sloped?
Schluter®-KERDI-SHOWER-LT/-LTS are prefabricated sloped shower trays with integrated KERDI waterproofing.
How to fix a Kerdi drain in a shower?
Apply a continuous 1/4″ – 3/8″ (6 – 10 mm) bead of KERDI-FIX to the underside of the adaptor ring. Align the holes in the adaptor ring with the bolt holes in the installed drain and place the adaptor ring on the installed drain flange. Re-insert and tighten the bolts using a star pattern.
What kind of adaptor do I need for Kerdi drain?
The KERDI-DRAIN adaptor kits are designed to convert clamping ring drains by equipping them with an integrated bonding flange. The adaptor kits include a stainless steel adaptor ring with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring shower drains.
Is the Schluter Kerdi drain cover stainless steel?
Made by Designer Drains of Reclaimed 304 Stainless Steel in the USA. “Assisting The Environment One Shower At A Time” Stainless Steel Screws Included With Every Drain. Stylish & Super Durable Finishes Available. *Ordering a drain cover, does not include the drain kit/surround if it is not selected on the product page.*
How does a Schluter Kerdi shower adaptor work?
The adaptor kits include a stainless steel adaptor ring with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring shower drains. The adaptor ring replaces the clamping ring and is attached to the drain body using the clamping ring bolts.
Where is the best place to install a Kerdi line drain?
This sleek and versatile linear drain is easy to install and offers an interesting array of design opportunities, including wheelchair-accessible showers. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage.
How big is a Kerdi line shower grate?
• KERDI-LINE-STYLE available lengths ranging from 20” to 48” (50 cm to 120 cm) This curvaceous drain grate style really strikes a pose in the shower. Soft, rounded lines adorn this shower grate to add a touch of flare, while keeping a crisp and clean look.
What should I use to fix Kerdi line in my shower?
Apply a generous bead of KERDI-FIX to the top and bottom of the channel support. The use of KERDI-FIX limits the ability to level KERDI-LINE. Note: Schluter®-Systems strongly recommends a leak test be performed on the connection between the drain and waste line prior to continuing on with the remainder of the installation whenever possible.
The adaptor kit includes a stainless steel adapter ring with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring shower drains. The adaptor ring replaces the clamping ring and is attached to the drain body using the clamping ring bolts.
