How far do you insert SharkBite fittings?
SharkBite push-to-connect pipe insertion depth and pipe size compatibility.
| SharkBite Fitting Size | Nominal Pipe Size | Pipe Insertion Depth (IN) |
|---|---|---|
| 1 in. | 1 in. CTS | 1.31 |
| 1-1/4 in. | 1-1/4 in. CTS | 1.88 |
| 1-1/2 in. | 1-1/2 in. CTS | 2.05 |
| 2 in. | 2 in. CTS | 2.19 |
How do you fit a SharkBite fitting?
How To Install SharkBite Brass Push-To-Connect Fittings
- Identify the pipe material. To get started, identify the pipe material.
- Cut pipe cleanly & squarely. Be sure the pipe is free of scratches or debris and cut the pipe as cleanly and squarely as possible.
- Measure & mark the insertion depth.
- Make the connection.
Are SharkBite shut off valves directional?
There is no flow direction on a ball valve unless it has a bleeder, which Sharkbite does not. Rule of thumb, if there is no marking on any type of valve then it does not matter which way it’s installed.
Can a SharkBite valve be used for main water shut off?
Shark bite valve will be fine. Just make sure you clean the copper pipe thoroughly so there are no rough edges or bits of solder left.
Can you put a SharkBite on backwards?
General purpose, spring-loaded check valve prevents the reverse flow of water. Innovative push-to-connect design makes for quick and easy installation on PEX, copper, CPVC, PE-RT and HDPE lines. Can be installed horizontally or vertically. Ideal for working in tight spaces.
How to install a push to connect Sharkbite valve?
SharkBite valves feature push-to-connect ends that make them quick and easy to install. To make your connection, cut the pipe as cleanly and squarely as possible. Ensure the pipe is free of scratches and debris. If you are handling copper pipe, remove any sharp edges or burrs.
How big of a pipe do you cut to install Sharkbite stop valve?
If you need to cut your pipe, cut as cleanly and squarely as possible. Make sure to leave a minimum of 1-inch of pipe to insert the SharkBite stop valve onto the stub out. Be sure the pipe is free of scratches and debris.
How does Sharkbite measure insertion depth of pipe?
If you are handling copper pipe, remove any sharp edges or burrs. Next, use your SharkBite Depth & Deburr tool to measure and mark the insertion depth on your pipe. You can find the insertion depth chart here: Push the pipe into the fitting on the valve up to the insertion mark. Now, turn on your water and check the connection.
What are the different types of Sharkbite valves?
SharkBite offers a full range of valves for controlling water flow. Our line of valves include ball valves, pressure regulating valves, thermostatic mixing valves, temperature & pressure relief valves, check valves, outlet boxes, and stop valves.
What is the best water shut off valve?
The best water shut off valve that we have chosen for your recommendation is the Dramm 12353 Heavy-Duty Brass Shut-Off Valve. There are many great valves in this review, but Dramm’s quality in their valves is superb and you don’t end up with a botched installation when you need the job to get done right away.
What to know about water shutoff valves?
- blocking water.
- Ball Valve. A ball valve has a quarter-turn handle attached to a steel ball inside the valve.
- Gate Valve. A gate valve has a piece of metal inside that is lowered like a gate when the handle is turned to the “off” position.
What is a sink shut off valve?
Under-sink shutoff valves, also called fixture shutoffs or stop valves, allow you to turn off the water to the sink (or other fixture) without having to use the home’s main shutoff.
What is a safety shut-off valve?
A safety shut-off valve features a springing action that shuts off the valve automatically if an electric current failure is detected. When this happens, the valve is de-energized. The electric circuit is typically designed so that it opens up for any failure in the system.
