How far away from the wall should a toilet tank be?
The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. Minimum distance in front of the toilet to the facing wall or fixture is 21 inches.
How can I hide the gap between my toilet and wall?
If you or someone is handy you could wedge a wood piece behind the toilet tank and the wall. It would be sort of U shaped so that it fits around the sides and top of the toilet tank. Paint it the same color as your toilet tank. Put a hand towel or cloth over it to put your tissue box, plant or etc.
How many inches is a toilet tank?
Tanks come in a few different sizes, and one of them is small. Small tanks vary in size; however, one standard length is 15 1/8 inches. It is common to see these tanks on toilets with bowls and seats of a similar size.
Why is my toilet so far from the wall?
When toilet flanges are installed it is typically in the early stages of the project and the standard 12″ measurement is taken from the drywall, rather than the finished tile surface that you are measuring from. That means your flange was set at a distance further from the wall than even the 13″ you measured.
Are toilet sizes standard?
The simple answer to the question “Are toilet seats a standard size?” is no. Unfortunately, toilet seats aren’t produced in a standard size, however, that doesn’t mean you can’t easily find a replacement for your own toilet.
Does toilet tank size matter?
When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model.
What should I do if my toilet tank keeps filling up?
If a toilet fills randomly and empties without flushing, it is in need of a quick fix or repair. If you hear your toilet tank continue to fill for a long time after you flush, a couple things may be wrong. First make sure that the shut off valve to your toilet is opened all the way so enough water can get to the tank to fill it up properly.
What should I do if my toilet tank is randomly running?
First make sure that the shut off valve to your toilet is opened all the way so enough water can get to the tank to fill it up properly. Open the tank and see if the flap is positioned correctly. If it isn’t, place it securely over the hole.
How do you replace the Flapper on a toilet?
To replace the flapper, start by turning off the water to your toilet and draining the toilet tank. After this, you should be able to reach inside, grab the flapper and carefully remove, it by pulling it off the tabs that secure it on either side. Next, detach the flapper from the chain that connects to the toilet handle.
What to look for when repairing a toilet?
The first step in making repairs to the parts of a toilet tank is to determine which toilet pieces are the problem. The fast way to do this is to look for the vertical white plastic tube standing up inside the tank. This is known as the Flush Valve and acts as a protection mechanism to keep the tank from overfilling.
How do you replace a toilet tank at Home Depot?
Lift the tank straight up and off the toilet base and set it upside down on the floor on an old towel or rug. Make sure you have a helper — toilet tanks are usually in an awkward place and are heavier than they appear. Remove the spud washer and take it with you to your local Home Depot to find the right replacement.
If a toilet fills randomly and empties without flushing, it is in need of a quick fix or repair. If you hear your toilet tank continue to fill for a long time after you flush, a couple things may be wrong. First make sure that the shut off valve to your toilet is opened all the way so enough water can get to the tank to fill it up properly.
How to fix a leak in a toilet tank?
gaskets, seals, & wax rings 1 Before you get started, inspect the area where you will be working and have a bucket on hand to catch water. 2 Turn off the water supply valve and flush the toilet. 3 Disconnect the supply line from the tank and sponge the inside of the tank until it’s dry. More
Why does water randomly run out of toilet tank?
If your toilet randomly runs off and on for a few seconds, it is likely due to a broken flapper. While the flapper is supposed to drop down and re-seal the tank when enough water has gone through, a cracked or decaying flapper will allow water to keep flowing through and run periodically.
