How does a feed pump work in a boiler?
The dry saturated steam generated in the boiler is passed through a set of tubes placed in the path of the flue gases, in which it will be heated further by the hot gas to increase its temperature about the saturation temperature. A feed pump is a boiler accessory required to force the feed water at high pressure into the boiler.
What are the different types of boiler fittings?
It is an main fitting in the boiler, Water level indicator indicates the water level inside the boiler. It is a safety device upon which safe working of the boiler depends. Water-tube indicator the water consists of a vertical hard glass tube G which is fitted with two gunmetal tubes A and B.
What kind of parts do I need for an outdoor wood boiler?
Browse our website to discover many different manufacturers such as WoodMaster, Heatmor, Central Boiler and many more. We also have a wide range of parts including pump sentry, circulating pumps, pex tubing, PVC fittings, and additional outdoor wood boiler parts that will help keep your wood boilers running efficiently.
What do you need to know about boiler mountings?
The boiler mountings are fittings which are mounted on the boiler for its proper functioning. Mountings are water level indicator, safety valve, pressure gauge, etc. It may be noted that a boiler cannot function safely without the mountings.
What do you need to know about boiler fittings?
An overview of the necessary fittings, accessories and controls for a boiler from nameplates and safety valves to gauge glasses and level controls. In the latter half of the 19th century explosions of steam boilers were commonplace.
How can I connect my wood burning stove to my boiler?
A steam vent pipe can be installed, running upwards from the boiler stove and supplying the cold water supply of a property. Alternatively, you might wish to connect the hot water tank and heat loss radiator to the main loop of the system, and form another loop by using injector tees and feeding the other radiators.
What should I do if my boiler is not working?
Water should return to its normal working level relatively quickly. If this does not happen, then a blockage in the water cock could be the reason, and remedial action should be taken as soon as possible. 3. Close the steam cock and open the drain cock for approximately 5 seconds. 4. Close the drain cock and open the steam cock.
Is the stop valve on a boiler a throttling valve?
The stop valve is not designed as a throttling valve, and should be fully open or closed. It should always be opened slowly to prevent any sudden rise in downstream pressure and associated waterhammer, and to help restrict the fall in boiler pressure and any possible associated priming.
