How do you unlock a Coast spa hot tub?
To unlock either Settings or Panel first select Settings (if it says “On”) or Panel (if it says “On”), than press in the middle of the screen for at least 5 seconds.
What kind of control panels do Clearwater spas use?
WARM COOL TP600 control panel, 5-button Spa Models: XS Series Gold Package, U.S./Canada/European TP600 Manual, Clearwater Spas 1-1-14 TP600 Control Panels Balboa Water Group® 40940_J2 10-08-13 Manufactured under one or more of these patents.
What kind of warranty does Clearwater Spa have?
41 Troubleshooting 41 System Trouble 41 Controls 42 Pumps 42 Jets 43 Water 44 Warranty 7 INTRODUCTION Congratulations on your purchase of a new Clearwater Spa! Your Clearwater Spa is designed and manufactured with the finest components available and is engineered with comfort, low maintenance, and durability in mind.
Where is the power cut off on a Clearwater spa?
ANSI/NFPA 70-1987. The power Na supply cut off must be readily accessible to the spa cupant, but installed at least 5 feet from spa water.oc •est the performance of the GFCI according to manufac- T ers recommendations. If the GFCI does not perform tur orrectly, there may be a ground current flowing indicatingc the possibility of electric shock.
How does the circ pump work on a Clearwater spa?
If the spa has a Circ Pump, it can be activated by pressing the “Light” button during Priming Mode. Priming the Pumps As soon as the above display appears on the panel, push the “Jet” button once to start Pump 1 in low-speed and then again to switch to high-speed.
What are the control panels on a Clearwater Hot Tub?
Clearwater Spa topside Control Panels and authentic replacement overlays for most model Clearwater Spas. Factory original replacement spa parts. Single round button overlay model 11-1302-08 for select model Artesian Spas. This is a single pump switch for on/off control of one spa pump. Fits the round, single pump control panel.
41 Troubleshooting 41 System Trouble 41 Controls 42 Pumps 42 Jets 43 Water 44 Warranty 7 INTRODUCTION Congratulations on your purchase of a new Clearwater Spa! Your Clearwater Spa is designed and manufactured with the finest components available and is engineered with comfort, low maintenance, and durability in mind.
Which is Balboa hot tub control panel do I Need?
Plug type is for newer Balboa Clearwater control systems and also used in select Bullfrog Spas. If you were referred to this part… This Divine 12575_A. hot tub control panel overlay fits the 52098 Divine and Clearwater spa topside. 7 button overlay for Divine 3-pump system.
If the spa has a Circ Pump, it can be activated by pressing the “Light” button during Priming Mode. Priming the Pumps As soon as the above display appears on the panel, push the “Jet” button once to start Pump 1 in low-speed and then again to switch to high-speed.
