How do you turn on the hot water on a Vokera boiler?
Turn the mode selector switch to the OFF position, switch on the electrical supply to the appliance. The green LED should be flashing, you may now select either HOT WATER ONLY or HEATING AND HOT WATER. By turning on a hot water outlet (tap) the boiler will fire to deliver hot water.
How do you turn off a Vokera boiler?
Grasp the outer clock face and turn clock-wise until the correct ‘time of day’ is opposite the black pointer. The time clock has a three-position switch. This switch over-rides the timed settings (‘on’ & ‘off’ times) of the clock. The Vokera digital time clock will automatically switch your boiler on and off.
How do you turn on a vokera mynute boiler?
Ensure the gas and electrical supply to the boiler is turned on. Turn the mode selector switch to the ON position. When there is a request for heating or hot water via the time clock or programmer, the boiler will begin an ignition sequence.
How do you turn off hot water on vokera?
Using the mode selector switch, turn it to the OFF/ RESET position, then turn it back to the ‘hot wa- ter only’ or ‘heating & hot water’ position (see also 3.3). Allow a period of two minutes to elapse before turning the mode switch to the reset position.
How does a mynute he water heater work?
Your Mynute HE boiler supplies heated water to your radiators and hot water tank. The central heating and hot water is controlled via a time clock or programmer and any thermo- stats that your installer may have fitted. The boiler will light when it receives a request from the time clock or programmer via any thermostat that may also be installed.
How does frost protection work on a vokera boiler?
Frost protection function will keep burner or/and pump operating until main water temperature reaches level of 35°C for central heating water and 55°C for hot water only. To sustain the frost protection function you need to provide your boiler with electrical supply at all times.
Ensure the gas and electrical supply to the boiler is turned on. Turn the mode selector switch to the ON position. When there is a request for heating or hot water via the time clock or programmer, the boiler will begin an ignition sequence.
Using the mode selector switch, turn it to the OFF/ RESET position, then turn it back to the ‘hot wa- ter only’ or ‘heating & hot water’ position (see also 3.3). Allow a period of two minutes to elapse before turning the mode switch to the reset position.
Where is the mode selector switch on a vokera boiler?
Depending on boiler model you purchased and the time of the year (winter/summer) you will be able to choose/activate one (central heating) or two modes (central heating and hot water mode). In order to set the proper mode you should use “mode selector switch”. Its position is indicated on the picture above
Your Mynute HE boiler supplies heated water to your radiators and hot water tank. The central heating and hot water is controlled via a time clock or programmer and any thermo- stats that your installer may have fitted. The boiler will light when it receives a request from the time clock or programmer via any thermostat that may also be installed.
