How do you turn a Rinnai water heater past 120?

How do you turn a Rinnai water heater past 120?

Can I set the temperature higher than 120℉ on my Rinnai tankless?

1. Unplug the unit.
2. Remove the front cover by removing the screws behind the plastic tabs on the 4 corners of the plate.
3. Locate the dip switches, which are located under the bottom right corner beneath the label.
4. Find dip switch number 6 and turn it on.

How do I lower the temperature on my Rinnai tankless water heater?

1. Step 1 – Turn Power On. In order to adjust the default temperature on a Rinnai unit, the power has to be on.
2. Step 2 – Remove Front Panel. The first step to change the default max temperature on a Rinnai tankless heater is to remove the front panel.
3. Step 3 – Press Priority Button.
4. Step 4 – Flip Switch #6 in Dip Switch SW1.

How to turn a Rinnai rl94 to 140 degrees?

Both color set of switches have to be on #6 in order for the controller to get up to 140 degrees 🙂

Do you know if you raise the temperature on a Rinnai?

Do you know whether or not on a Rinnai if you raise the temperature with the controller to 140 degrees, can you not get just “warm” water by mixing the hot and cold water together or is the temperature you set on the controller is what your going to get?

What’s the default temperature on a Rinnai Water Heater?

For your safety, Rinnai tankless water heaters come with a maximum temperature default setting of 120℉ to help prevent scalding. However, by following these simple steps, you can increase the temperature to 140℉ if you choose. Flow the six (6) step process to adjust your temperature: 1. Unplug the unit.

Is there a way to turn a Rinnai without a controller?

However, if you look at page 8 of the manual referenced earlier in your correspondence with Phil, you will find that Rinnai says you can obtain these temperatures WITHOUT a controller by setting dip switch #5 to the on position. Your choice if you want to “experiment” Hope this is helpful! Thanks and best wishes! Jerry M.