How do you remove the handle from a kitchen faucet?

With the handles and escutcheon out of the way, you should see the mounting nuts that hold the faucet body in place. There may be nuts at both handle locations, as well as at the spout. Use channel-type pliers to remove the mounting nuts. Do the same for the spout mounting nut, if there is one. Remove the faucet body from under the sink.

Can a faucet be removed from under the sink?

Remove the faucet body from under the sink. Sometimes the faucet will fall on its own once the mounting nuts are removed; other times, you will need to tug on it gently to free it. If it is too difficult to reach behind the drain trap, don’t be afraid to disassemble the drain trap to provide more room for working.

How do you replace the bottom of a faucet?

Note: Unless these supply tubes are relatively new, it will be best to replace them with new tubes when you install a new faucet. Using a basin wrench, reach up behind the sink basin from inside the vanity cabinet and grip the mounting nut that holds one of the faucet valve tailpieces to the sink or countertop.

Is there a way to turn off a top mount faucet?

In most cases, there is a packing nut that you can make a 1/4-turn tighter. If you tighten this nut too much you will not be able to turn the handle, so always tighten in small increments. Check to make sure that the water is turned off by turning on the faucet valves.

What’s the best way to remove an old kitchen faucet?

Faucets experience a lot of friction from running water and everyday use. A locking nut or screws keeps a faucet firmly attached to the sink. Locate this nut and use the basin wrench to loosen and unscrew it. This nut can prove difficult to remove, depending on how long the old faucet has been in use.

Can a faucet handle be turned off under the sink?

In some cases, when turning the valves off under the sink they may leak from the handle. In most cases, there is a packing nut that you can make a 1/4-turn tighter. If you tighten this nut too much you will not be able to turn the handle, so always tighten in small increments.

How to remove a bridge kitchen faucet at Home Depot?

Bridge Kitchen Faucets 1 Tools and Supplies for Removing a Kitchen Faucet ” 2 Turn Off the Water ” 3 Disconnect Supply Lines ” 4 Remove Mounting Nuts Or Screws ” 5 Remove the Faucet ” 6 More Tips on Removing a Kitchen Faucet ”