How do you remove a small bathtub drain?

How do you remove a small bathtub drain?

Instructions

1. Remove the Tub Stopper or Screen. Remove the drain stopper or screen to gain access to the tub’s drain fitting.
2. Remove the Drain With a Plug Wrench.
3. Remove the Drain With Locking Pliers.
4. Clean the Drain Opening.

Can you convert a shower to a bathtub?

You can change your shower into a tub. While it may be more common these days to convert a bathtub into a shower, there are many reasons for doing just the opposite and changing a shower into a tub. Some homes do not even have bathtubs, and their owners may want to have at least one in their home.

How do you remove a tub from a shower?

Pull the tiles from the bathtub surround wall to expose the pipes. Disconnect all of the pipes from the tub. For a steel or fiberglass tub, tilt it up and lift it out of the enclosure. Place tape over the existing shower drain. Set the shower base on the tub’s subfloor and mark the location of its center drain with permanent marker.

What’s the best way to replace a shower drain?

Sketch a plan of the new drain location on a sheet of newsprint. Measure the distance from the old tub drain to the new shower drain. Attach a length of 1.5-inch feeder pipe from the old wall pipes to the new drain hole. Mark a 12-inch access tunnel on the subfloor for the new feeder pipe. Cut through the subfloor along the access tunnel lines.

Do you need a left or right hand tub drain?

When installing or replacing a bathtub drain, you may find that you will need to make allowances for a right or left-handed drain. A drop-in tub can be installed either right or left. Generally, whether the drain is left or right is only important if you are installing a ‘standard’ rectangular…

Which is the correct drain location for a bathtub?

Depending on how your drain and vent pipes are run, selecting a bathtub with the correct drain location is a very important decision. There are also centered drain tubs, which, as you can guess, have the drain in the center of the tub. There are also tubs with reversible drains.

How do you replace a bathtub with a shower?

Remove any screws or nails securing the bathtub lip to the wall. With an assistant, tip up one side of the bathtub to remove it. You may need to remove a small portion of drywall (next to the tub area) to accommodate one of the outer corners of the tub as it swings upward. Thoroughly clean the demolished area, removing nails and screws from studs.

Where is the center drain on a bath tub?

Center drain – centered against back wall of tub. Right hand – right side when looking at it from the side you would enter tub. The white and bone tubs pictured here are Center Drain standard bath tubs. There are two types of common shower pans: the full shower and the shower stall.

Do you need to replace drain plug on bath tub?

SHOWER REPLACEMENT NEEDS!!! The right cap for the end of the trim on your bath tub. Corners look normal when they are covered with the right piece instead of left as an empty trim gap. Drop in this replacement drain plug to fill your bath tub with water again.

Why does my shower drain redirect water to the tub?

If your bathtub has a showerhead, your shower valve redirects water from the showerhead to the tub faucet. When it’s not working, water simultaneously pours from both outlets. It’s easy to fix, so let’s learn how.