How do you remove a Moen kitchen sprayer?
The sprayer hose is connected to the diverter with a hydrolock connector and is easy to remove.
- Turn off the valves under the sink by rotating the valve handles counterclockwise.
- Hold the hose in one hand and push upward on the hydrolock connection with the other to disconnect the sprayer from the diverter.
How do you disconnect the hydrolock connection on a Moen?
When the button is fully depressed, it unlocks the connection so you can pull the hoses apart. Connecting the hoses with a Duralock fitting is even easier. You simply insert the male fitting into the female one and push until you hear a click — no need to push the button.
How do you connect a hydrolock to a duralock?
Connecting the hoses with a Duralock fitting is even easier. You simply insert the male fitting into the female one and push until you hear a click — no need to push the button. If the connection won’t click, remove the hose and check for obstructions in the female connector.
How do I get the quick connect out of my faucet?
Press the white button (A) in to lock the faucet part in. Gently tug on the quick connect to verify it is secure. Press and hold the black button (B) while pulling the faucet part out of the quick connect.
What to do if your duralock connection doesn’t click?
If the connection won’t click, remove the hose and check for obstructions in the female connector. Once connected properly, neither a Hydrolock or Duralock fitting will leak, and both should last the life of the faucet.
When the button is fully depressed, it unlocks the connection so you can pull the hoses apart. Connecting the hoses with a Duralock fitting is even easier. You simply insert the male fitting into the female one and push until you hear a click — no need to push the button.
What’s the difference between hydrolock and duralock quick connect?
If you see a straight metal shaft on the hose connection, instead of a threaded one, then it has either a Hydrolock or Duralock quick connect fitting. Both are plastic and work the same way, but they look different, and the procedures for removing them are different, too. The Moen Duralock fitting is white, and it has a black plastic button.
How do you lock a quick connect faucet?
Squeeze the white tabs (B) together and push the tabs in. This will cause the white tabs (B) to push back into the quick connect releasing the white button. Insert the faucet part into the end (A) of the quick connect. Press the white button (A) in to lock the faucet part in. Gently tug on the quick connect to verify it is secure.
How do you disconnect Moen quick connect faucet?
To disconnect the fitting, press the button in, using your finger or a pair of pliers if it’s stuck, and pull the hose out of the connection. To reconnect the fitting, simply insert the hose into the fitting and push until you hear a clicking sound.
