How do you reattach an InSinkErator?
IMPORTANT
- Insert the wrench into the hole at the bottom of the garbage disposal.
- Work the wrench back and forth in both directions.
- Continue working with the wrench.
- Check the overload protector.
- Check inside garbage disposal’s grinding chamber.
- Turn on the water, then the garbage disposal.
How to reset garbage disposal InSinkErator [ step by step guide ]?
To reset garbage disposal follow these simple instructions: 1 Make sure that the disposal switch is in the “OFF” position. 2 Gently press the red button in to reset garbage disposal. 3 Turn on a cold stream of water and turn the disposal switch to “ON” position, the disposal should now run again.
What does the overload Protector on InSinkErator do?
Your InSinkErator garbage disposal is equipped with a device called an overload protector or reset button. This device will turn the garbage disposal off automatically if there is something wrong. If the garbage disposal is jammed, if it is run for a very long period of time, or if there is another issue, it will shut down automatically.
How big is the reset button on a garbage disposal?
If the overload protector has tripped, you will see that the red button has popped out about a quarter of an inch (5mm). To reset garbage disposal follow these simple instructions:
Your InSinkErator garbage disposal is equipped with a device called an overload protector or reset button. This device will turn the garbage disposal off automatically if there is something wrong. If the garbage disposal is jammed, if it is run for a very long period of time, or if there is another issue, it will shut down automatically.
What kind of wrench do I need for InSinkErator?
Every InSinkErator is shipped with a self-service wrench. The wrench is silver colored, and shaped like a little crank, about four inches long. If you cannot find the wrench, you can use a standard 1/4-inch Allen wrench, or click here to order a replacement. Make certain that the garbage disposal’s switch is in the off position.
If the overload protector has tripped, you will see that the red button has popped out about a quarter of an inch (5mm). To reset garbage disposal follow these simple instructions:
