How do you keep water from going down the bathtub drain?

Place the cloth or sponge inside a plastic sandwich bag. Squeeze as much air out as you can and zip it closed or use a rubber band to secure it. Stuff the bag into the drain. The material should expand to snugly fill the hole, and the plastic bag will prevent water from escaping down the drain.

Can I use a wire hanger to unclog drain?

We understand that most homeowners don’t own drain snakes and other specialized plumbing equipment, but almost everyone has a wire coat hanger somewhere in the back of a closet. Using a wire coat hanger, you can clear most clogs without having to disassemble the drain or using harsh chemicals.

How can I get a coat hanger out of a drain pipe?

If that doesn’t end up being the case, then you’ll need to call a plumber but it seems likely you’ll have to do that anyway. You could try twisting the free end of the wire around a six inch piece of broom stick or large dowel. Use this as a handle to pull fairly hard on the wire while simultaneously twisting the wire down in the pipe.

How do you get a plunger out of a drain?

You need to stick the coat hanger down to the stopper and hook under the cross piece that the stopper rod is attached. It can stick below the stopper and you need to keep plunging and pulling the coat hanger to free it. You need to keep turning the coat hanger so that the hook lines up to hook under the cross piece on the stopper.

Why is the plunger on my bathtub not working?

I have an old bathtub drain assembly that is similar to this: As far as I can tell, the linkage broke off completely due to old age. If I unscrew the trip lever and cover, it’s not attached to anything and I can’t feel anything if I try to reach inside. I’m reasonably certain that the plunger is down since water doesn’t drain from the tub.

What should I do if my bathtub drain plug pops out?

There SHOULD be a P-trap below the drain. If you can get the tailpiece off of the bottom of the tub (unscrew the metal drain, then the tailpiece should pop out), you should be able to spear the plug. I just had this problem this morning and searched online for a solution, which is how I stumbled on this page.

Where does the overflow go in a bathtub?

Overflow Structure. The bathtub drain is divided into two parts–the main drain and the overflow. The main drain is at the bottom of the tub and the overflow is a few inches below the rim.

How do you fix an overflow drain plug?

The good news is that replacing an overflow drain gasket is a fairly easy fix. The first step is to remove the screws that mount the cover plate. Pull out the assembly, including the drain plug. Shown here is the old deteriorated gasket that must be removed. I used an old wire hanger to dig out the rotted gasket material from the overflow body.