How do you install a copper supply line?
Install a hammer arrester to each. Sweat all the parts. Anchor the pipes with at least one clamp―preferably two―at each stub out as shown. A copper supply strap attaches to the face of the studs. Pipes fit into notches or holes, sized and spaced for correct placement.
What kind of fitting do I need to install a water line?
An Adapt-a-Tee is an ideal plumbing fitting for this purpose. Adapt-A-Tees are easy to install, and they provide the extra line you need with the least amount of work. The type designed for copper pipe uses simple compression fittings, and there are other types designed for attachment to CPVC or PEX water supply pipes.
Why do copper supply lines cross drainpipes?
Supply lines are usually routed so they do not cross drainpipes or vents. In most cases, it’s easier to make the horizontal runs in the crawlspace or basement. Long runs and bends lower water pressure slightly. Hammer arresters (Step 3) prevent banging noise when you turn off a faucet.
Why are copper pipes used for underground water supply?
Although copper pipes are rigid and resistant to corrosion, copper pipes deteriorate under certain soil conditions. Where soil or site conditions threaten to corrode copper supply lines, builders often sheathe the copper pipe within synthetic sleeves.
Install a hammer arrester to each. Sweat all the parts. Anchor the pipes with at least one clamp―preferably two―at each stub out as shown. A copper supply strap attaches to the face of the studs. Pipes fit into notches or holes, sized and spaced for correct placement.
An Adapt-a-Tee is an ideal plumbing fitting for this purpose. Adapt-A-Tees are easy to install, and they provide the extra line you need with the least amount of work. The type designed for copper pipe uses simple compression fittings, and there are other types designed for attachment to CPVC or PEX water supply pipes.
Supply lines are usually routed so they do not cross drainpipes or vents. In most cases, it’s easier to make the horizontal runs in the crawlspace or basement. Long runs and bends lower water pressure slightly. Hammer arresters (Step 3) prevent banging noise when you turn off a faucet.
Where do you connect a water line to a refrigerator?
Check around where the refrigerator is placed to see if there is an existing water supply line extending from the wall or up from the floor. If there is a water supply valve already installed behind your fridge, simply connect the supply valve to the refrigerator valve with 1/4-inch water line supply tubing .
