How do you flush a toilet sensor?
I found that if you drape a length of toilet paper over the sensor (folded over a few times), you can fool the Potty Eye. Then when he’s all set we can pull it off and let the flush happen. No more worrying about getting sucked down the pipes and he gets a kick out of fooling the potty!
How big is a Kohler touchless toilet flush?
Technical Details Manufacturer KOHLER K-1954-0 Touchless Toilet Flush K Part Number 1954-0 Product Dimensions 22.86 x 15.24 x 6.99 cm; 18.14 Grams Batteries 4 AA batteries required. (included) Item model number K-1954-0
How do you hook up a Kohler touchless toilet?
Determine the bracket location and attach it to the tank. Next, hang the module inside the tank with the flush wheel directly above the center of the flapper or one inch to the side of the canister. Connect the flush valve or flapper to the touchless module with the chain. Lastly, install the battery pack and ensure proper operation.
Why does my Kohler touchless flush toilet Beep?
NOTE: The Touchless Module beeps five times before it activates, indicating low batteries. Batteries are low. Replace the batteries. Do not use rechargeable batteries. Possible Cause: When refilling, the water rises too rapidly and activates the sensor.
Do you need trip lever for Kohler touchless flush kit?
First, remove the trip lever, if you prefer a streamlined look. Many installations can work with both the Touchless flush kit and a trip lever in place. Determine the bracket location and attach it to the tank.
NOTE: The Touchless Module beeps five times before it activates, indicating low batteries. Batteries are low. Replace the batteries. Do not use rechargeable batteries. Possible Cause: When refilling, the water rises too rapidly and activates the sensor.
Determine the bracket location and attach it to the tank. Next, hang the module inside the tank with the flush wheel directly above the center of the flapper or one inch to the side of the canister. Connect the flush valve or flapper to the touchless module with the chain. Lastly, install the battery pack and ensure proper operation.
Why does my touchless flush toilet not flush?
Wipe the Touchless Module and underside of the tank lid dry. Make sure the tank lid is completely dry. Install foam pad kit K-1275758 to reduce the amount of condensation under the toilet lid. Possible Cause: Item (s) on or above the tank lid are triggering the sensor.
