How do you fix a drain linkage in a bathtub?
The first step to start fixing the bathtub drain linkage is to locate and access the pipes that are connected to the tub. Usually, there is a panel behind the drain that hides the pipes. Remove the panel from the wall and gain access to the pipes. First, use the screwdriver to unscrew the drain overflow faceplate.
How do you replace a plunger in a bathtub?
When you have cleaned the drain seat well, install the new plunger and rest it in the drain seat. Then install the new drain linkage to the plunger. After you’re done, replace the upper pipe and cover the joint with plumber’s putty. When you have connected the linkage to the plunger correctly, slide the whole mechanism into the upper pipe.
How do you remove drain pipe from bathtub?
First, remove the upper pipe by unscrewing the nuts that are holding it. You have got access to the upper pipe by removing the face plate. When you have taken the pipe out, you will be able to see the drain seat in which the plunger has to rest.
What does it mean when plunger does not come out of bathtub?
When you pull out the bathtub drain linkage and the plunger does not come out with it, it means it may have broken off of the linkage. In this case, you will have to locate the plunger and take it out. There is usually an access panel door that is covering the door assembly.
How do you install a bathtub drain linkage?
How to Replace a Bathtub Drain Linkage Step 1 – Expose the Pipes Step 2 – Pull Out the Drain Linkage Step 3 – Check for Broken Linkage Step 4 – Locate the Drain Assembly and Clear It Step 5 – Locate Drain Seat Step 6 – Install New Plunger Step 7 – Complete Installing New Bathtub Drain Linkage Step 8 – Attach Linkage End to Face Plate
What is the standard size of a bathtub drain?
A standard modern bathtub drain is 1 1/2 inches in diameter — the width straight across the middle.
What size is a bathtub drain flange?
The flange has an outer diameter of 3 1/8″ and an opening of 1 7/8″. This would preclude the use of any standard bathtub drain kit. Unless you are giving inaccurate dimensions, 1 7/8″ is the same o.d. as 1 1/2″ pipe, and that is the dimension of a Watco, and many other push/pull drains.
What is a bathtub drain Assembly?
A bathtub drain assembly is a series of plumbing parts that transport the waste water from a bathtub, feeding the water into a large drainpipe. The bathtub drain assembly is made up of its own series of pipes that are interconnected, and also connect to the large drainpipe.
