How do you change a cartridge in a bathtub?

How do you change a cartridge in a bathtub?

How to do it

1. removing handle from faucet. Remove Handle.
2. removing retaining clip. Remove Retaining Clip.
3. remove cartridge with wrench. Remove Cartridge.
4. replacing o-rings on cartridge. Replace O-Rings.
5. installing new cartridge. Install New Cartridge.

How do you change the cartridge in a bathtub?

Bathtub cartridges regulate water flow and temperature. To change a bathtub cartridge, begin by removing the handle as described in Step 1. Remove the screws holding the escutcheon plate in place and slide out the escutcheon. Remove the retaining clip that holds the cartridge in place with a screwdriver. Remove the cartridge with pliers.

What to use to remove stuck faucet valve cartridge?

You really should have started with a deep socket that fits snug. But now its kind of iffy whether a deep socket will slip. The next tool to use if it doesn’t come off with a deep socket is a pipe wrench, one with a handle about 12″ to 14″ long. You need the long handle for leverage. You will also need to protect the sink trim from damage.

How can I get the handle off my bathtub faucet?

Wiggle the handle and pull it off. You may need a faucet handle puller if the handle will not come off by hand. Place a socket wrench over the bathtub faucet stem until it covers the hex nut. Turn the wrench counterclockwise to loosen the nut until you can pull the stem free.

When do you need to replace a shower cartridge?

For a faucet that struggles with turning on and off, it’s likely that the shower faucet cartridge needs to be replaced. Once you shut off the water and remove the handle and escutcheon, you can quickly determine whether your single-handle tub and shower faucet is a cartridge, ball, or disk type.

How do you remove a bath faucet?

Remove Faucet Handles Turn the shut-off valve on the water line for the shower and tub to turn off the water. Place the tip of a screwdriver beneath the edge of the decorative cap on a handle to pry it off. Turn screws in the center of the faucet handles counterclockwise to remove them, and pull the handles off.

How do you replace a shower cartridge?

How to Replace a Shower Cartridge: Step by Step Step one: Gather your supplies Step two: Prepare Step three: Remove the handle Step four: Remove the faceplate that surrounds the cartridge Step five: Remove the metal sheath surrounding the shower cartridge Step six: Remove the pin holding the cartridge in place Step seven: Remove the cartridge

Can’t remove faucet cartridge?

Depending on the configuration of the faucet and wall or backsplash, you may be able to hook a pry bar behind the handle, support it against a piece of wood and pry the cartridge. It often takes only a small movement to break the seal so you can remove the cartridge by pulling on the handle.

What is a shower cartridge?

A shower cartridge is a mechanical device that is housed within the body of a mixer shower. The job of the cartridge is to blend hot and cold water supplies to give an output flow at the desired temperature. In additional to blending cartridges, some showers have separate flow cartridges to turn vary…