How do you adjust the temperature on a Grohe?

How do you adjust the temperature on a Grohe?

Calibration of a thermostat

1. Open the shut-off valve and check the temperature of the water with a thermometer.
2. Lever out cap.
3. Remove screw.
4. Detach temperature control handle.
5. Turn regulating nut until the water temperature has reached 38 °C.
6. Install temperature control handle so that button points towards the front.

How do you open a Grohe shower?

If there’s no sign of a screw head, look for a small metal circle. This is a decorative cap that covers the screws holding your Grohe shower temperature control handle in place. Use a small flat-head screwdriver to pop off the cap, followed by a hex key to take out the newly exposed screw.

How do you set the temperature on a Grohe shower?

The latest Grohe shower faucets, such as the Grohtherm 3000+, feature a digital temperature valve. Input the maximum safe temperature for your faucet that is password protected (simple 4-digit password, default 0000). Raise the temperature by pressing the red flame button, or lower the temperature by using the blue cold button.

Where is the hot water stop on a Grohe faucet?

The thermostatic Grohe faucets have a hot-water-limit stop under the temperature adjustment handle. If the shower water is not as hot as you prefer, this stop can be adjusted to provide higher-temperature water. Locate the set screw on the underside of the temperature control adjustment lever or knob.

What makes a Grohe shower safe to use?

All Grohe faucets use an integrated cartridge system that prevents the faucet or shower from giving water from a single hot or cold line. This internal temperature management system prevents users from being burned by the hot water, which is often in excess of 100 degrees Fahrenheit.

Where is the safety lock on a Grohe shower valve?

Press in the safety lock located at the top of the hot water safety valve. The safety lock, if installed properly, is behind the actual hot water handle and flush against the wall. The safety lock must be depressed to move the safety valve.

Is there a hot water limit on a Grohe shower?

They come with a variety of faceplate and handle styles, but underneath the faceplate, the faucet bodies are similar in design. The thermostatic Grohe faucets have a hot-water-limit stop under the temperature adjustment handle. If the shower water is not as hot as you prefer, this stop can be adjusted to provide higher-temperature water.

How to increase hot water flow on a Grohe faucet?

Turn the temperature knob all the way to the coldest setting. Turn on the water-flow control knob while holding a thermometer under the water; you should be able to stand to the side so as not to get wet but still should be able to reach the controls. Slowly turn the temperature control knob counterclockwise toward the “hot” position.

How does Grohe turbostat work in the shower?

GROHE TurboStat technology lies at the heart of our Grohtherm® thermostatic valves. The thermoelement’s unrivaled sensitivity means it delivers water at the desired temperature within a fraction of a second – and keeps it constant for the duration of the shower. No more time, water and energy wasted getting the temperature right.

Is there a Safestop button on the Grohe thermostat?

Grohtherm thermostats come with a 100°F/38°C SafeStop button and can be complemented with an additional limiter at 109°F/42°C. But more than just controlling the temperature, GROHE TurboStat compensates precisely for fluctuations in pressure for a consistently comfortable shower.