How do I take care of my sprinkler system for the winter?
Shut off the water supply to the irrigation system. The main shut off valve for your irrigation system needs to be protected against freezing. Make sure it is wrapped with insulation (foam insulation tape and a plastic bag) to protect it from harsh winter temperatures and prevent it from freezing.
What do you need to know about drip irrigation?
They have sensors that tell the system if it’s raining out so it will not run. They also have sensors that tell the system if water is pooling up around the nozzles. However, most people will start out with a less expensive, basic drip irrigation system.
What should I do if my irrigation system is leaking?
Turn off the water supply to your irrigation system. Make sure your irrigation system is turned off at the controller so it doesn’t turn on while you’re working. Look for the shut-off valve for your irrigation system either inside or outside near your water meter, and rotate the handle so it’s perpendicular to the pipe.
How are water nozzles used in drip irrigation?
They have different nozzles that can control water flow so that plants like succulents can get less water, while plants with higher water needs can get more. They have sensors that tell the system if it’s raining out so it will not run. They also have sensors that tell the system if water is pooling up around the nozzles.
Do you need a repair kit for Watts?
You need quick and effective solutions before deciding whether to repair or replace equipment that is not performing. At Watts, we have the engineering excellence and manufacturing support to make the right recommendations for you, right from the start. Repair kits are available for many Watts products and systems.
What are the symptoms of an irrigation system problem?
Problems with an irrigation system typically make themselves evident with several common symptoms: Individual sprinkler heads not working Low water pressure at the sprinkler heads Sprinkler zones do not turn on Leaking around a zone valve Leak at the sprinkler head furthest from the valve
Turn off the water supply to your irrigation system. Make sure your irrigation system is turned off at the controller so it doesn’t turn on while you’re working. Look for the shut-off valve for your irrigation system either inside or outside near your water meter, and rotate the handle so it’s perpendicular to the pipe.
What should I do if my irrigation valve is not working?
Screw on a new solenoid and reconnect the wires. The valve itself may need to be rebuilt or replaced. In some cases, simply disassembling and cleaning the diaphragm will solve the problem.
What happens when a section valve is opened on an irrigation system?
When a section valve is opened and the water travels unrestricted in the empty lateral pipes, it creates a shock. The air in the pipe will be quickly voided through the heads, causing those abnormal velocities that damage pipes, heads and component parts.
