How do I stop my FloodStop from beeping?
Push the Mute button to silence the alarm, and note that the red light will continue to flash. This means the FloodStop Valve is closed, and will remain closed until you push the Open button.
How do you turn off a water heater alarm?
place a sensor puck on the floor in a pan near the pressure relief valve drain tube, or in a position where the leaking water would first appear. When the sensor detects leaking water, the system will automatically shut off the feed and sound an audible alarm.
How to turn off Floodstop automatic water shut off?
FloodStop by OnSite PRO™ Leak Detection & Automatic Water Shut-off System Installation and Operating Manual • Canbetestedatanytimewiththetouchofabutton • Canaccommodateadditionalwaterleaksensors • 1YearLimitedWarranty 4. Position the FloodStop Valve so that the arrow on the side of the valve is pointing to the water heater.
Where is the Floodstop valve on a water heater?
Position the FloodStop Valve so that the arrow on the side of the valve is pointing to the water heater. Install the FloodStop Valve between the rigid water line coming from the manual cold water valve and the water heater.
Is there a warranty on a Floodstop water heater?
FloodStop Water Heater Kit 1 Year Limited Warranty OnSite PRO Inc. warrants the enclosed FloodStop product to be free from defects in materials or workmanship, under normal use and service, for a period of one (1) year from the date of purchase.
How does a Floodstop water heater battery backup work?
FloodStop has a battery backup system that allows the unit to continue working in the event that you have a power outage. To set up the backup system, open the front of the Control Panel and install 4 fresh AA alkaline batteries (batteries not included). The low battery indicator light will now stop flashing and the beep will stop.
FloodStop by OnSite PRO™ Leak Detection & Automatic Water Shut-off System Installation and Operating Manual • Canbetestedatanytimewiththetouchofabutton • Canaccommodateadditionalwaterleaksensors • 1YearLimitedWarranty 4. Position the FloodStop Valve so that the arrow on the side of the valve is pointing to the water heater.
How does Floodstop work on a water heater?
These FloodStop kits are designed to automatically and immediately shut off the water supply to the water heater, filter, water softener, or other appliance or plumbing fixture you are protecting when water is detected by the leak sensor.
How can I Reset my flood protection system?
To reset the system after the problem has been fixed, simply wipe the sensors dry and press the green “open” button on the control unit. Certified safe for drinking water applications.
How does a Floodstop system protect your home?
FloodStop systems can help keep a water disaster from ruining your home as they are designed to automatically and immediately shut off the water supply to the appliance when water is detected by the leak sensor.
