How do I reset my Worcester boiler Greenstar 30si?
In most cases, you will simply need to hold the button marked ‘reset’ for three seconds. In some models you may see a reset light at the end of the temperature dial. In this case, just turn the dial down to the reset light, leave it there for three seconds and then turn it back to its original position.
What temperature should my Worcester Bosch boiler be set at?
Turning your heating down by even 1% can reduce your energy consumption by as much as 10%, so it’s worthwhile thinking what temperature you need to feel comfortable. In winter, most people have their heating set at around 18-21° or around 21-23° for those who feel the cold more.
What temperature should a Worcester Bosch boiler be set at?
Is there a way to repressurise a Worcester Bosch Greenstar 15i?
Our Worcester Bosch Greenstar 15i erp combi boiler has lost all its pressure. We’ve not bled the radiators and don’t know if there’s a leak (nothing obvious). It’s less than a year old so I just want to try to top it up and see if the pressure drops again. I really can’t see how to repressurise it. The manual doesn’t say.
How do you re pressurise a Worcester Greenstar boiler?
Pull the blue lever down to start the filling process. Monitor the pressure gauge. When the needle reaches between 1 to 1.5 bar on the gauge, release the blue lever to stop the filling process. Locate the filling key and follow the instructions for re-pressurising.
How to repressurise your Worcester Bosch boiler-Palace?
Monitor the boiler pressure. Now that water is entering the system you need to keep an eye on the pressure gauge on the front of your boiler. When it reaches the required 1.5 tighten the white plastic nut back up until you can hear the water stop. 8. Remove the internal filling key Turn the key back to the lock padlock symbol position.
Where is the filling key on a Worcester Bosch boiler?
The internal filling key is a plastic, specially designed tool that is used to unlock, and lock, the unit. 1. Locate the internal filling key On the underside of your Worcester boiler there should be a white plastic tray. Remove the tray and locate the key. 2. Locate the arrows on the key
Our Worcester Bosch Greenstar 15i erp combi boiler has lost all its pressure. We’ve not bled the radiators and don’t know if there’s a leak (nothing obvious). It’s less than a year old so I just want to try to top it up and see if the pressure drops again. I really can’t see how to repressurise it. The manual doesn’t say.
Pull the blue lever down to start the filling process. Monitor the pressure gauge. When the needle reaches between 1 to 1.5 bar on the gauge, release the blue lever to stop the filling process. Locate the filling key and follow the instructions for re-pressurising.
Monitor the boiler pressure. Now that water is entering the system you need to keep an eye on the pressure gauge on the front of your boiler. When it reaches the required 1.5 tighten the white plastic nut back up until you can hear the water stop. 8. Remove the internal filling key Turn the key back to the lock padlock symbol position.
Do you need a cold water cistern for a Worcester Bosch Greenstar?
Your setup is an unvented cylinder which has an expansion vessel so no need for a cold water cistern either as it is fed from the mains. So to get back on track, you will need to find that filling loop.
