How do I know if my spa is heating?

To test hot tub heating elements for integrity, use an ohm meter on its lowest setting. With the meter’s test leads, measure the resistance between the two element terminals. The acceptable resistance range for most heaters is between 9-12Ω (ohms), some may be as high as 20Ω.

What does the control panel on a Solana hot tub do?

They also come with a control panel which allows the user to control the functions of the spa. Like other spas, a Solana is connected to an outdoor fuse box, which provides the power. If you are having problems with the spa you may need to troubleshoot the control panel as well as the fuse box. Check the control panel for error messages.

How to troubleshoot a spa control panel problem?

Reset the control panel if it only displays dashes and not error messages. Turn the power off for one hour and then turn it back on. If the control panel is displaying strange messages or have lights blinking at the same time, it could be a software issue with the circuit board. Check if there is corrosion or condensation.

What to do if your hot tub control panel is dead?

This is why it is important to keep the control panel in good working order. Check out hot tub controls on Amazon. If part of the control panel is dead or the whole panel is frozen, you will want to see if the problem is the circuit board or the control panel.

Why is the heating element on my spa not working?

If for any reason one of these components fail then the required voltage to the coil will be jeopardized and the contactor will not close in order to send power to the heating element. As mentioned above, it is usually one of these components that will cause a spa not to heat.

How does the hot tub control panel work?

The hot tub control panel is like a timer that keeps the spa’s temperature constant. It turns off the spa when you forget to and troubleshoots problems. Thus, it is very important to have a spa control system in good working condition. Many issues could face your spa, including electrical issues.

What to do if your Sundance spa heater is not turning on?

Heater is deactivated and pump may not turn on. Flow/pressure switch is defective. These steps should only be taken after checking and testing the above steps. With the circ pump and the main pump off, test switch operation with an ohmmeter in the continuity position, test for continuity across switch terminals.