How do I Disconnect and reconnect the tubing?

Just to add some visuals to the others’ explanations using your photo, you need to (1) push on the collar trying to move it parallel to the tube, and (2) pull the tube. To reconnect, push the tube into the collar until it stops (should be about 1 inch).

How do you disconnect a PEX quick connect fitting?

This is polypropylene, but the connectors are very similar to PEX quick-connect fittings. You need to push the protruding collar (the inner tube that the polypropylene is secured into) back inside the connector, and you have to apply the pressure to that collar evenly.

What’s the proper way to safely disconnect hot tub?

It provided 220 for the hot tube and runs independently from the main panel. What is the proper way to make this safe? I capped the ends of the line where it connected to the hot tub and left the circuit off, then I put a lock on the panel box. Is this safe enough or should I pull the breaker out completely?

What to use to disconnect quick connect kitchen faucet hose?

A flat head screwdriver may also be used to push the white tabs in on each side. Lightly pull down on the black connector while pushing in the white tabs. When installing a new hose, ensure that black nylon hose is threaded tightly into the black connector or leaking may occur.

Can you remove a flex disc in the shower?

While you get more comfortable with the disc, consider removing the disc in the shower, or using our Flex Removal Pouches to reduce the mess. You can also empty the disc prior to removal in the toilet by bearing down.

How do you remove ribbon cable from iFixit?

To remove it, use a spudger or fingernail to lift the clear blue tab away from the connector. Next, use the tip of the spudger to push open the plastic locking tab. The locking tab will only move about 2 mm. Pull the ribbon cable out of the connector in the direction of the cable.

Can you empty a flex disc in the toilet?

You can also empty the disc prior to removal in the toilet by bearing down. This disc will slightly shift allowing blood to empty into the toilet. Bearing down will also bring the disc closer to the vaginal opening so it’s easier to reach and remove.