How do I connect my main line to my sprinkler system?

Connecting a Lawn Irrigation System to a Home Water Supply

Tap the outside faucet. Unscrew the outside faucet and install a 1-inch galvanized or copper tee fitting facing down.
Tapping the main line. Cut a section out of your main line and install a compression tee fitting.
Tapping the basement water meter.

Can you run a sprinkler system off a hose bib?

Basically yes. It would work as a temporary measure eg let’s say you have done all your planting and are now fed up of watering every day, you could hook up a rudimentary system to a hose bib. You can even buy timers which connect to the hose bib and the hose which you will run out to your plants.

How can I connect my sprinkler system to my well?

Connecting to Other Water Sources You can use water from a well, pond, or stream for your irrigation system the same way homes connect to city water. The first thing you need to do is determine the water pressure and flow rate. To find a well source’s water pressure, simply place a pressure gauge on the wellhead pipe.

How are fire sprinkler systems supplied by mains water?

The guidelines refer to all types of automatic fire sprinkler systems supplied directly or indirectly by mains water in accordance with statutory obligations placed upon water undertakers. These guidelines have been developed to reflect the legislative framework at the time of writing.

How big of a main do you need for a sprinkler system?

Mains Fed is a connection directly from the towns mains water supply. This must include back flow protections to prevent water from the sprinkler system re-entering the mains supply. Typically, a 32mm main will be the smallest pipe size that can be used for a risk category 1 system.

How does boosted mains fed sprinkler system work?

Boosted Mains Fed is a connection to a boosted water supply. Typically, in blocks of flats a tank of water will be pumped to guarantee pressure and flow of cold water services to the flats. This can be used for sprinkler supplies however specials measures must be in place to safeguard the sprinkler supplies and sometime prioritise them.

How can I connect my sprinkler system to my water supply?

There are two ways to connect to the water supply; 1. Simply connect the sprinkler system valves to the water supply using the existing hose faucet. This may be the easiest route but also could have a few drawbacks, being lack of flow rate and noise of system when running.

Can a mist sprinkler system be connected to a water main?

Although a low-pressure mist system could never be connected to a town main due to the pressure requirement, a high pressure Plumis system is designed to directly pump water from a standard domestic water connection without exceeding the maximum quantity of water permitted by Water Regulations.