How do I adjust the hot water on my oil furnace?

There should be a gray colored box inside this box is the temperature adjustment for the boiler. Once you have the cover off you will see a dial with temperature settings on it. Its usually to the left side middle of the box. Adjust it to 180.

How do you light a peerless furnace?

How to Light a Peerless Heater

Sniff all around the Peerless heater to see if you detect the odor of gas.
Set the thermostat on the Peerless heater to its lowest temperature.
Look for the gas control assembly.
Turn the manual shutoff knob to the “Off” position, and then wait five minutes for any gas to clear the heater.

How do I turn up the hot water on my boiler?

How to Adjust the Water Temperature of a Hot Water Boiler

Test your tap water temperature. Allow the water to run until it is fully hot and fill up a tall glass.
Adjust the thermostat.
Turn the knob on the side of the tank.
Rotate the thermostat control.

What kind of boiler is peerless WBV / WV?

The Peerless WBV/WV is an oil-fired boiler available for both hot water and steam systems. It has an efficiency rating of up to 87.5% AFUE and has earned the Energy Star label. They are available as fully-packaged or knockdown units and come in three sizes, from three to five sections, with eight firing rates.

How much water is in a peerless boiler?

1 Burner input based on No. 2 fuel oil with a heating value of 140,000 Btu per gallon. 2 Net water ratings based on an allowance of 1.15. Consult factory before selecting a boiler for installations having unusual piping and pickup requirements, such as intermittent system operation, extensive piping systems, etc.

Can a WBV boiler be used for natural draft?

The cast iron sections are assembled with steel push nipples and factory tested to assure a water tight seal. The Series WBV residential, oil-fired boilers are available for use with both hot water and steam systems and designed for natural draft (chimney) venting.

What are the features of a peerless WBV boiler?

The fully-packaged or knockdown boilers are available in 3 sizes (3-5 sections) with 8 firing rates. Features of the Series WBV boilers include a full plate swing-out door and convertible rear to top flue outlet (for 3 and 4 section boilers only).

Why do you need a peerless oil fired boiler?

Whether you need a compact system to fit in your home or a larger system to cover a bigger family’s heating needs, Peerless® has the right oil-fired boiler for you. We choose Peerless® Boilers for our customers because of their:

Can a peerless boiler be used with a chimney?

With Hart Home Comfort, an Accredited Peerless® Contractor, a free, no-obligation consultation can get your house situated for the right heating oil boiler you and your family deserve. The residential oil-fired boilers of the WBV™ Series are suitable for use with both hot water and steam systems and are designed for chimney venting.